We have a Call Pilot 1002rp on release 3.03. It is networked with two other 1002rp systems, one on 3.03 and one on 4.04. Our CEO wants to know if we can send a broadcast message. We have been looking in the NTPs and CP training manuals for some sort of procedure how to do that, but we can't find anything. How do we do that? What has to be done to broadcast it to users on all three systems?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Pilot - Sending a Broadcast Message
- Thread starter AJ9U
- Start date
Jeffnortel
Vendor
You will need to use the broadcast mbox on all three systems. Compose a msg and send it to all three broadcast mboxes. You will need to use the location code+ broadcast mbox number for each remote system when composing the msg.
- Status
Similar threads
- Locked
- Question
- Locked
- Question