Just had a customer ask me if it is possible to not let people check there mailbox from out side the office. He only wants them to check messages from the system itself. Has anyone ever done this if so how? Right now if you hit a mailbox and press ** it lets you log in he wants to stop that.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Pilot 150 and remote access
- Thread starter hawks
- Start date
norstarboy125
Vendor
No can do, whoever is aware of hitting ** ext pswd will always be able to check messages. After all it is a voice mail system and checking messages externally is a pretty normal procedure.
Charm City Communications
Charm City Communications
allworxguy
Vendor
It can be done. If you set "Return to AA" = N, it also disables **.
Marv ccna
Sales, Installation & Service for Norstar, BCM & Allworx
Serving Ottawa and Eastern Ontario since 1990
Marv ccna
Sales, Installation & Service for Norstar, BCM & Allworx
Serving Ottawa and Eastern Ontario since 1990
- Thread starter
- #4
curlycord
Programmer
I think that only applies to older mails.
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
curlycord
Programmer
BTW the correct method is to enter the mails DN and not **
You cannot block just 1 DN
=----(((((((((()----=
curlycord
Toronto Canada
You cannot block just 1 DN
=----(((((((((()----=
curlycord
Toronto Canada
norstarboy125
Vendor
No true, having return to AA set to N doesn't disable end users from checking messages remotely. That just denies a caller from pressing * ext. when trying to exit a subscriber mailbox.
Charm City Communications
Charm City Communications
- Status
Similar threads
- Locked
- Question