Call Forwarding problem on G3

[GTD5]

When I implement call forwarding on a single line port
forwarding to another station it works fine. If an outside caller calls into the did number of that station...the call forwards ok however if that call is still in progress and a second call comes in on the DID#
the call rings at the station that is forwarded completely
disregarding the forwarding of the station...However if an
internal station dials the station it follows the forwarding. The Forwarded station is a member of a hunt group with idol members. Coverage after forwarding is On.
Any Ideas?

 

[RTMCKEE]

On your call forwarding FAC are you using Busy/DA for ALL?

Does this happen on the multi line phones or only the single line?

RTMCKEE

CM 2.1.1
Prologix R9.05
Modular Messaging 1.1

 

[orypecos]

To avoid locking up all the ports, the pbx will only foward a call every so many senconds. Otherwise, if you had your home phone forwared to your work phone and your work phone forwarded to your home, then u would get one big vicious circle using all the ports in the trunk group.