Brooktrout analog delima

[FEEL01]

We have an OPT 61, The Fax server folks want analog lines from PBX. The lines must be Loop. The server answers then
gives a tone, the PBX should then send digits. I have tried to set up a DID rte to Auto Term to a 500 port, no joy. The only thing the Brooktrout responds to is our analog ( 500 )
port. Any Ideas? Past posts on this issue seem to trial off.
Did anyone find a solution?

 

[johnpoole]

can you build an analog loop start did? i haven't tried but give it a whirl, if you get stuck i'll build a quick route and try it here..

john poole
bellsouth business
columbia,sc

 

[FEEL01]

John,

Thanks! I built a DID RTE and could never get the Brooktrout to answer my call. I tried wnk/wnk ddl/ddl
imm/imm no joy. The only time he will answer is if it is set up as a 500 port.

 

[pbxn]

Brooktrout, that word alone gives me the shakes. here is what I have working on my option 61, this should help. BTW I covered every type of config I could think of and it was still real picky. This should work.

REQ: prt
TYPE: rdb
CUST 0
ROUT 40

TYPE RDB
CUST 00
ROUT 40
DES FAX POS
TKTP TIE
NPID_TBL_NUM 0
ESN YES
CNVT NO
SAT NO
RCLS EXT
VTRK NO
DTRK YES
BRIP NO
DGTP DTI
ISDN NO
DSEL 3VCE
PTYP DTT
AUTO NO
DNIS NO
ICOG IA
SRCH LIN
TRMB YES
STEP
ACOD 39540
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3

IENB 5
TFD 0
VSS 0
VGD 6
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
VRAT NO
MUS NO


PAGE 002

RACD NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TDET NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

TN 25 1
DATE
PAGE
DES

DES FAX POS
TN 025 01
TYPE TIE
CUST 0
TRK DTI
PDCA 1
PCML MU
NCOS 4
RTMB 40 1
A/B BIT SIGNALING
TGAR 1
SIGL EM4
STRI/STRO WNK WNK
SUPN YES
AST NO
IAPG 0
CLS CTD DTN ECD WTA LPR APN THFD HKD
P10 VNL
TKID
DATE 24 NOV 2004

 

[FEEL01]

Thanx PBXN,

I have had great success with this in a lineside
config, however I am stuck with making this fly in an analog
enviroment.

 

[pbxn]

I was in your same shoes, and this is what they got whether they liked it or not. Brooktrout has some Nortle specific programming guidlines on their site I believe, but this was the only thing that seemed to make the server happy.

 

[johnpoole]

that's a pain, the brook will not answer a wnk, the delayed will not send digits after answer supervision. i build a ldr trunk with imm start, don't have a brook to test it on? had to use imm start

john poole
bellsouth business
columbia,sc

 

[pbxn]

Here is a link to Brooktrout with Nortel fyi.

http://www.brooktrout.com/search.cfm

 

[johnpoole]

try building a dsc to the analog loop start trunk, use a dgt to insert the 4 digits, i know that you can send digits to a page system post answer using that

john poole
bellsouth business
columbia,sc