block caller ID from showing up on specific phones 2

[d00ner62]

I have a customer that has employees that don't answer the call if they see a specific caller ID, Personally I would just fire them, however it their business.

Is there a way to have a call stripped of its Caller ID after it comes in?

I want to strip certain phones of seeing the caller ID so they have no choice but to answer it because they don't know who is calling.

Its only on certain phones so we cant just cancel caller ID LOL

 

[mattKnight]

Analogue handset?

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[d00ner62]

No, 9508 and 1408 sets

Analog lines though

 

[Avaya9]

I have Set this up using Short codes, i have given those people who want to hide their caller IDs the short to dail out and hide their number, in my Case i have set it up this way, Code *54 feature Dial telephone number W so when they dial this number 0826695756 they dial *540826695756 and this does hide the number

 

[d00ner62]

That's for outbound calls

I want to stop the inbound caller ID from showing up on specific sets

 

[hairlessupportmonkey]

cant be done. the ipo will not block cli.

the only way is to match the cli, and redial back out and in again withholding the number.

other than that, use a big stick....

ACSS - SME
General Geek

 

[tlpeter]

You can actually do this.

When your group has number 100 then make a shortcode like this:

200
Dail
100S"Blocked Number"
0

Route your incoming call route to 200 as destination.

Now you will see "Blocked Number" on the phone.


BAZINGA!

I'm not insane, my mother had me tested!

 

[hairlessupportmonkey]

A star for a nice solution..

ACSS - SME
General Geek

 

[hairlessupportmonkey]

OK, i rescind my star. I cant get it to work on my switch peter!

ACSS - SME
General Geek

 

[mattKnight]

>Analogue handset?

My point was have you considered using analogue handsets....

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[intrigrant]

tlpeters solution did work in older software, we have experimented with it but it is as stupid as can be, why hide someones identity when you are in the same building?
If you really need that then call a DID with your number withheld or something like that.

 

[Bas1234]

It work form me.

Create a SC

Code: 200
Feat: Dail Extn
TelN: 100YW

Now when the call comes in it won't show a number only after the call is picked up.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[tlpeter]

hairlessupportmonkey (IS/IT--Management) 17 Dec 13 12:12
OK, i rescind my star. I cant get it to work on my switch peter!

It does not work?
I will try it later when i have some time.
But a given star won't be returned
My new goal is 2000.

BAZINGA!

I'm not insane, my mother had me tested!

 

[AACon]

I would think if they didn't know who was calling, they would not answer those either. I know if I don't recognize caller ID on my cell I don't answer it.

-Austin
ACE: Implement IP Office

 

[Ekster]

Add a personal directory entry of the incoming CLI with the name "Number Withheld" for each required user, the IPO will match the CLI and display "Number Withheld". Personal directory overrides system directory.

Simples!

+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++