Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya IP Office System Monitor

Status
Not open for further replies.

ratherbhntn

Technical User
Mar 11, 2005
20
US
Does anyone know what this error code means? Error Code 4?

1950131mS SCN Ctrl Rx: ParseRemoteBLF from 192.168.2.104 Array Length(10)
71950131mS PRN: ParseRemoteBLF from 192.168.2.104: non-matching lengths? expected=0 len=10
71950252mS SCN Ctrl Rx: ParseRemoteBLF from 192.168.0.14 Array Length(67)
71950252mS PRN: ParseRemoteBLF from 192.168.0.14: non-matching lengths? expected=0 len=67
71952131mS SCN Ctrl Rx: ParseRemoteBLF from 192.168.2.104 Array Length(10)
71952131mS PRN: ParseRemoteBLF from 192.168.2.104: non-matching lengths? expected=0 len=10
71952191mS SCN Ctrl Rx: VPNNetworkedPBX(192.168.2.104)::ReadLII len(22) Unicode(2)
71952255mS SCN Ctrl Rx: ParseRemoteBLF from 192.168.0.14 Array Length(67)
71952256mS PRN: ParseRemoteBLF from 192.168.0.14: non-matching lengths? expected=0 len=67
71952320mS SCN Ctrl Rx: VPNNetworkedPBX(192.168.0.14)::ReadLII len(24) Unicode(2)
71960893mS SCN Ctrl Rx: ParseRemoteBLF from 192.168.2.104 Array Length(10)
71960893mS PRN: ParseRemoteBLF from 192.168.2.104: non-matching lengths? expected=0 len=10
71960953mS SCN Ctrl Rx: VPNNetworkedPBX(192.168.2.104)::ReadLII len(22) Unicode(2)
71966403mS PRN: WhoIsTCPSession: created
71968974mS PRN: SCNTFTP::process (2) RESET received from 192.168.2.104
71968974mS PRN: VPNN: PBX 192.168.2.104 Not Responding - error code 4
71968974mS PRN: VPNN: PBX 192.168.2.104 Not Responding or Reset AU=11

 
Yes, I show remote scn in office manager but in SCN Monitor Status it doesnt show active, just stays on starting, can only get ext. to ext. dialing with short codes. Not sure if it is a port on SonicWall or what?
 
Sonicwall :) do a search and you will h.323;inspection needs to be turned off.


BAZINGA!

I'm not insane, my mother had me tested!

 
H323 Transformations is unchecked. We have five SCN's. Some can see locations but other locations cannot see them. Any suggestions?
 
Routing i guess.


BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top