Avaya IP Office 500 V2 SNMP polling

[sys.sysadm]

Greetings!
I have Avaya IP Office 500 V2 and it doesn'n listen any ports except 80.
I want to use SNMP polling and enabled SNMP in system events/configuration but there is no response from avaya by snmpwalk (v1).
What I'm doing wrong?

 

[derfloh]

Check SysMon. You did see SNMP requests. You can’t test UDP connectivity and SNMP is UDP. IPO for sure is lending in far more ports than only port 80 as it is essential for Voice connectivity and other services.

 

[sys.sysadm]

Check SysMon. You did see SNMP requests. You can’t test UDP connectivity and SNMP is UDP. IPO for sure is lending in far more ports than only port 80 as it is essential for Voice connectivity and other services.

Checked. I see trafic, but snmpwalk fails (v1)

11:48:30 3925972162mS Interface Rx: v=LAN1 LAN
Ethernet Header info - dst=00e007090436 src=08bfb80196d9 len=76
IP Header info - Dst=192.168.100.250 Src=192.168.100.138 vl=0x45 tos=0x00 len=62 id=0xe293
ttl=128 flg=0 off=0 pcol=17(UDP) sum=0x0d46
UDP Header info - DstPort=161(SNMP) SrcPort=51914 Len=42 Sum=0x6384
0000 30 20 02 01 01 04 04 74 65 73 74 a5 15 02 04 1b 0 .....test.....
0010 46 70 f5 02 01 00 02 01 0a 30 07 30 05 06 01 2b Fp.......0.0...+
11:48:30 3925972163mS Interface Tx: v=LAN1 LAN
Ethernet Header info - dst=08bfb80196d9 src=00e007090436 len=70
IP Header info - Dst=192.168.100.138 Src=192.168.100.250 vl=0x45 tos=0x00 len=56 id=0x7ad4
ttl=99 flg=0 off=0 pcol=1(ICMP) sum=0x921b
ICMP Destination Unreachable(Port Unreachable). [csum=0xcde2]
Useful Original packet details:-
Src=192.168.100.138 Dst=192.168.100.250 pcol=17(UDP) id=0xe293 tos=0x00 ttl=128
SrcPort=51914 DstPort=161(SNMP) :-
0000 45 00 00 3e e2 93 00 00 80 11 0d 46 c0 a8 64 8a E..>.......F..d.
0010 c0 a8 64 fa ca ca 00 a1 00 2a 63 84 ..d......*c.


P.S. "test" - is the community name

 

[hamidtelli5]

Greetings!
I have Avaya IP Office 500 V2 and it doesn'n listen any ports except 80.
I want to use SNMP polling and enabled SNMP in system events/configuration but there is no response from avaya by snmpwalk (v1).
What I'm doing wrong?

Hi there . i need some help
am looking for the electronic circuit diagram for ip 500 ds30
please do your best to find it

 

[derfloh]

Hi there . i need some help
am looking for the electronic circuit diagram for ip 500 ds30
please do your best to find it

That’s a new topic