Avaya 96XX SIP IP Phones with CS1000 7.5

[forcetranquille]

Hello guys,

Do you know if the Avaya 96XX Sip phones are compatible with CS1000 7.5 ?
What are the requirements ? CS1000 + SIP Line Gateway and SIP3 User Lic ? CS1000 + Session manager ? CS1000 + Session Manager + CM evolution server ?

I'm bit lost.
Thanks for your help
regards

 

[gwebster]

The 96xx IP Deskphone with SIP software is not compatible with CS 1000 + SIP Line Gateway or CS 1000 + Session Manager. Your last configuration is possible with the caveat that the 9600 would get features from the CM ES and not the CS 1000.

 

[forcetranquille]

Thanks gwebster

 

[GordonKapesMZ4]

I've been able to use the 96xx on an Asterisk platform.....I wonder if any features would work with the CS1000? With this SIP stuff, you never know until you try. I was told by Avaya that this phone would only work on a Call Manager platform, but so far I've used it on 2 different Non Avaya SIP networks.

 

[GordonKapesMZ4]

Actually here was the short way I set it up, and you could always try it and see what happens. Make sure SIP firmware is loaded into the phone.

I went into to SIP settings on the phone itself.

Changed the IP address to my UCx phone system:

Then I simply created an extension under my UCx GUI, similar to Element Manager.

Created a Usernmae and Password,

Logged the Username and Password into the phone and the phone connects....

I don't know the details behind CS1000 SIP though.....I actually personally prefer Unistim.....

 

[wilamy]

Forcetranquille Hi, one question. You have programmed phone model 1220. I really want to know if you run the fixed key and redial Confence.