haasstudios
Technical User
When I import a .dxf file (saved as R12 .dxf) into Corel draw 9 all my curves come out as angles. Is there a way to fix this? I must fix this!!! Please help! Thank you!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AutoCad .dxf file - curves not coming in properly
- Thread starter haasstudios
- Start date
- Status
cheungchan
Technical User
I am not familiar w/ CD 9. I am using CD 10 but in CD 10, I was able to import AutoCAD 2000i .DWG into Corel and the import dialog box has an option to keep all the curves in the .DWG as curves. I don't know if CD 9 can import Acad 2000i but maybe you can save it as an eariler version .DWG and try.
Hi
Not sure if this is a help but we had lots of problems with importing and exporting dxf file & eps files we would get short straight lines but we found this company and they sorted for us
cheers
Not sure if this is a help but we had lots of problems with importing and exporting dxf file & eps files we would get short straight lines but we found this company and they sorted for us
cheers
- Status
Similar threads
- Locked
- Question
- Locked
- Question