what you'll need to do is build a new rlb in load 86, just use a vacant rlb/rli use the same route that they use today, make the frl the same as the rlb's that you use auth codes on now, i assume they are the rlb's that your ld point to.. the mfrl needs to be the same as the present ld route... then go to 90 and print the spn's of all your 1800/1888/1877 etc then change them to the new rlb..
you could just point those to the same rlb as your ld's, but that would put them on the ld carrier, most cases you want those calls going to the local route.. so the new rlb will be the same as your ld route, all prompts except the route...
john poole
bellsouth business
columbia,sc