Audiocodes MP-114 as ATA on IP Office SIP Extension

[crashtest1000]

HI all

I am trying to configure an Audiocodes ATA (MP-114) on an IP Office as an analogue extension off a SIP Extension with a thirdparty endpoint licence.

Has anyone done this or got any notes on configuring these two. The IP Office is the simple bit its the Audiocodes that has so may options.

 

[Bas1234]

Save the text into an *.ini file and imort it.

MP11x: 192.168.4.71
IPO: 192.168.4.72

DNSPriServerIP = 192.168.5.11
SyslogServerIP = 192.168.4.89
EnableSyslog = 1
VXMLFIleName = ''

[BSP Params]

PCMLawSelect = 3
EnableLANWatchdog = 0
StorageServerNetworkAddress = 255.255.255.255

[Analog Params]

MinFlashHookTime = 70
FlashHookPeriod = 200
CountryCoefficients = 4

[ControlProtocols Params]

AdminStateLockControl = 0

[MGCP Params]


[MEGACO Params]

EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0

[Voice Engine Params]

FarEndDisconnectSilenceMethod = 2
FarEndDisconnectSilencePeriod = 120
CallProgressTonesFilename = 'nl_tones_13.dat'
BrokenConnectionEventTimeout = 3
CallerIDType = 16
V22ModemTransportType = 2
V23ModemTransportType = 2
V32ModemTransportType = 2
V34ModemTransportType = 2
CNGDetectorMode = 0
DTMFDetectorSensitivity = 1

[WEB Params]

UseWeblogo = 1

[SIP Params]

MAXDIGITS = 20
ALWAYSUSEROUTETABLE = 1
REGISTRATIONTIME = 3600
ISPROXYUSED = 0
ISREGISTERNEEDED = 0
AUTHENTICATIONMODE = 0
ISWAITFORDIALTONE = 1
ISTWOSTAGEDIAL = 0
ENABLECURRENTDISCONNECT = 1
GWDEBUGLEVEL = 5
CNONCE = ''
PASSWORD = ''
PROGRESSINDICATOR2IP = -1
ALWAYSSENDTOPROXY = 1
DISCONNECTONBROKENCONNECTION = 0
CDRSYSLOGSERVERIP = 0.0.0.0
PSTNALERTTIMEOUT = 180
SUBSCRIPTIONMODE = 1
EmergencyNumbers = '', '', '', ''
SBCREGISTRATIONTIME = 20

[IPsec Params]


[SNMP Params]


;
;  *** TABLE DspTemplates *** 
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts 
;

;
;  *** TABLE PREFIX *** 
;  
;

[ PREFIX ]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix, PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix, PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix, PREFIX_TransportType, PREFIX_SrcTrunkGroupID;
PREFIX 0 = *, 192.168.4.72, *, 1, 255, 0, -1, , -1, , -1, 1;

[ \PREFIX ]

;
;  *** TABLE CoderName *** 
;  
;

[ CoderName ]
FORMAT CoderName_Index = CoderName_Type, CoderName_PacketInterval, CoderName_rate, CoderName_PayloadType, CoderName_Sce;
CoderName 0 = g711Alaw64k, 20, 0, 255, 0;
CoderName 1 = g711Ulaw64k, 20, 0, 255, 0;
CoderName 2 = g729, 20, 0, 255, 0;
CoderName 5 = g711Alaw64k, 20, 0, 255, 0;
CoderName 6 = g711Ulaw64k, 20, 0, 255, 0;
CoderName 7 = g729, 20, 0, 255, 0;

[ \CoderName ]

;
;  *** TABLE TrunkGroup *** 
;  
;

[ TrunkGroup ]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId, TrunkGroup_LastTrunkId, TrunkGroup_Module;
TrunkGroup 0 = 1, 255, 1, 2, 100, 0, 255, 255;

[ \TrunkGroup ]

;
;  *** TABLE PstnPrefix *** 
;  
;

[ PstnPrefix ]
FORMAT PstnPrefix_Index = PstnPrefix_DestPrefix, PstnPrefix_TrunkGroupId, PstnPrefix_SourcePrefix, PstnPrefix_SourceAddress, PstnPrefix_ProfileId, PstnPrefix_SrcIPGroupID, PstnPrefix_DestHostPrefix, PstnPrefix_SrcHostPrefix;
PstnPrefix 0 = *, 1, *, *, 0, -1, , ;

[ \PstnPrefix ]

;
;  *** TABLE TxDtmfOption *** 
;  
;

[ TxDtmfOption ]
FORMAT TxDtmfOption_Index = TxDtmfOption_Type;
TxDtmfOption 0 = 4;

[ \TxDtmfOption ]

;
;  *** TABLE TrunkGroupSettings *** 
;  
;

[ TrunkGroupSettings ]
FORMAT TrunkGroupSettings_Index = TrunkGroupSettings_TrunkGroupId, TrunkGroupSettings_ChannelSelectMode, TrunkGroupSettings_RegistrationMode, TrunkGroupSettings_GatewayName, TrunkGroupSettings_ContactUser, TrunkGroupSettings_ServingIPGroup;
TrunkGroupSettings 0 = 1, 0, 255, , , -1;

[ \TrunkGroupSettings ]

;
;  *** TABLE TelProfile *** 
;  
;

[ TelProfile ]
FORMAT TelProfile_Index = TelProfile_ProfileName, TelProfile_TelPreference, TelProfile_CodersGroupID, TelProfile_IsFaxUsed, TelProfile_JitterBufMinDelay, TelProfile_JitterBufOptFactor, TelProfile_IPDiffServ, TelProfile_SigIPDiffServ, TelProfile_DtmfVolume, TelProfile_InputGain, TelProfile_VoiceVolume, TelProfile_EnableReversePolarity, TelProfile_EnableCurrentDisconnect, TelProfile_EnableDigitDelivery, TelProfile_EnableEC, TelProfile_MWIAnalog, TelProfile_MWIDisplay, TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia, TelProfile_ProgressIndicator2IP, TelProfile_TimeForReorderTone, TelProfile_EnableDIDWink, TelProfile_IsTwoStageDial, TelProfile_DisconnectOnBusyTone, TelProfile_EnableVoiceMailDelay, TelProfile_DialPlanIndex;
TelProfile 1 = , 1, 1, 1, 10, 10, 46, 40, -11, 0, 0, 0, 1, 0, 1, 0, 0, 200, 1, 8, 255, 0, 0, 1, 1, -1;

[ \TelProfile ]

;
;  *** TABLE IpProfile *** 
;  
;

[ IpProfile ]
FORMAT IpProfile_Index = IpProfile_ProfileName, IpProfile_IpPreference, IpProfile_CodersGroupID, IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay, IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, IpProfile_SigIPDiffServ, IpProfile_SCE, IpProfile_RTPRedundancyDepth, IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode, IpProfile_VxxTransportType, IpProfile_NSEMode, IpProfile_IsDTMFUsed, IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia, IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller, IpProfile_CopyDest2RedirectNumber, IpProfile_MediaSecurityBehaviour, IpProfile_CallLimit, IpProfile_DisconnectOnBrokenConnection, IpProfile_FirstTxDtmfOption, IpProfile_SecondTxDtmfOption, IpProfile_RxDTMFOption, IpProfile_EnableHold, IpProfile_InputGain, IpProfile_VoiceVolume, IpProfile_AddIEInSetup, IpProfile_SBCExtensionCodersGroupID, IpProfile_MediaIPVersionPreference, IpProfile_TranscodingMode;
IpProfile 1 = , 1, 1, 1, 10, 10, 46, 40, 0, 0, 0, 0, 2, 0, 0, 0, 1, 8, 1, 0, 0, -1, 0, 0, 0, 1, 1, 0, 0, , -1, 0, 0;

[ \IpProfile ]


]

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[Bas1234]

You are missing the top part of the INI file, copy that from the INI file you have right now.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[crashtest1000]

Thanks Bas123

I am getting closer.

Just checking is this connected via a SIP Trunk or Extension to the IP Office?

I can see your using 100 and 101

 

[Bas1234]

I used SIP Endpoints if im not mistaken.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[crashtest1000]

Thanks for the help

I can tell me a bit amore about the IP Office config?

I have tried as an extension and as a trunk and both fail.

 

[Bas1234]

Try to login a SIP user using 3CX if that works, you also try to unitck force auth. on the extension.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________