Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ARCserve 9.01 TCP Reconnection Timeout Error
- Thread starter dspare
- Start date
davidmichel
Technical User
Oh this comes up from time to time.
It is just a network timeout, and could be at any of a few spots.
First look to see if it happens with all targets or only when backing up a specific system.
All targets focus on the backup server, network cable, or switch.
Specific target focus on the target.
First thing I like to try is configure the client agent for a low priority. Yes low and not high. It works most of the time and it easier than tracking down the source of the problem.
I wrote a doc on troubleshooting connection timeouts, if I remember I'll update it and post it as an faq.
It is just a network timeout, and could be at any of a few spots.
First look to see if it happens with all targets or only when backing up a specific system.
All targets focus on the backup server, network cable, or switch.
Specific target focus on the target.
First thing I like to try is configure the client agent for a low priority. Yes low and not high. It works most of the time and it easier than tracking down the source of the problem.
I wrote a doc on troubleshooting connection timeouts, if I remember I'll update it and post it as an faq.
- Status