Have an odd problem -
We have a service desk that utilizes a vector-driven hunt group. On an inbound call, an initial announcement is played, then the customer can keypress for routing.
Today, the initial announcement no longer plays for the inbound calls ONLY on our ISDN trunk. There is no response when dialing directly to the announcement extension.
Inbound calls on tie trunks do not display the fault, announcements play normally.
I've reset the ISDN trunk and the VAL board with no change.
Anyone have any ideas what may be causing this?
We have a service desk that utilizes a vector-driven hunt group. On an inbound call, an initial announcement is played, then the customer can keypress for routing.
Today, the initial announcement no longer plays for the inbound calls ONLY on our ISDN trunk. There is no response when dialing directly to the announcement extension.
Inbound calls on tie trunks do not display the fault, announcements play normally.
I've reset the ISDN trunk and the VAL board with no change.
Anyone have any ideas what may be causing this?