Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Alarm light

Status
Not open for further replies.

brewerdude

IS-IT--Management
Sep 8, 2003
472
US
Anyone know if there are any products out there than can interpret alarms from a Nortel and use it to light up an alarm light?

I know an SEB can be used for monitoring and notify via email, but I'm just looking just to light a simple lamp.
 
The SEB has Normally Open and Normally Closed ontacts on the back for hard wired sensors (temp, water, etc.). These may be able to be used for alerting as well. Check with the SEB folks. You may have what you need.

--
Fletch

Nortel Emergency Services PLM

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at
 
If not the SEB, look at an ION modem. They have connections on the back and you can program them to set a voltage on whatever alarm string you define.

Perfection is expected, Excellence is Tolerated
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top