Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

admin up, line protocol flapping

Status
Not open for further replies.
Mark192

Mark192

IS-IT--Management
Joined
May 15, 2002
Messages
67
Location
GB
Need some help everyone.

Just plugged in my nice new 3662 to replace a 1760 and everything seems ok.

However it doesn't appear to be able to connect to the far end with pings etc, but it knows the far end is there as it can see it with sh cdp n d.

On checking the line protocol seems to be flapping up and down. Was working before, so getting a bit confused.

Anyone got any ideas???
 
Sort by date Sort by votes
what kind of interface is it? Erik Rudnick, CCIE No. 9545
mailto:erik@kuriosity.com
 
Upvote 0 Downvote
Serial..

Thanks anyway Erik, managed to get it resolved anyway...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Hayden09
  • Locked
  • Question Question
Cisco Sg-300 Flapping?
Replies
0
Views
668
Hayden09
Hayden09
woza
  • Locked
  • Question Question
GNS3: Delete the lines "transport preferred none"
Replies
1
Views
748
DrB0b
DrB0b
XLNTech1
  • Locked
  • Question Question
Cisco Nexus 9k new admin user
Replies
0
Views
939
XLNTech1
XLNTech1
telemarksman
  • Locked
  • Question Question
ATA Cisco SPA122 not triggering single line courtesy phone ringer
Replies
0
Views
305
telemarksman
telemarksman
bfordz
  • Locked
  • Question Question
new help on setting up third party VoIP phones through Catalyst 2960x switch
Replies
0
Views
356
bfordz
bfordz

Part and Inventory Search

Sponsor

Back
Top