8410D w/one-way speaker

[adh111681]

I have an 8410D with a one-way speaker. I was told that this is in programming, is there any way to change it to two-way??

 

[vaoldschl]

'cha st x' the first page of the station form for the 8410 has a 'Speakerphone' field. Set to 2-way.

 

[adh111681]

it is already set to two-way so what else could change it?

 

[ktripp]

The phone should be configured as a 8410D+. Plus designates two way speakerphone.

 

[vaoldschl]

At least on the switches I've seen there is no 8410D+. If your phone is programmed as an 8410D with speakerphone set to 2-way and you have tested it and you are getting sound in and not out I'd say you have a bad microphone.

 

[WHCARon]

Good Morning!

The only thing that comes to mind is the MUTE BUTTON ENABLED option on the station screen. Make sure it's set to YES (allows the user to mute/unmute).

Good Luck! WHCARon

 

[Definity]

Check The instrument, I think the instrument itself is bad, Maxg is right because the station programming seems OK for the speaker phone.
Best of Luck..