8 fax lines to tie line... 4

[takmsdsm]

I have a total of 8 numbers that i want to go into a tie line that will go to a fax server. Where would i set this up at? Any help in the right direction would be great.

This is an M1 11c

 

[dlesap]

These 8 numbers have to defined as DSC (LD 87) pointing to a RLI (LD 86) that is set up with TIE rout number

 

[johnpoole]

clear that one up.. you have 8 numbers you want to send to a tie, or 8 trunks to a tie for a fax server..

to send a number to a route

ld 86
new
rlb
x
route 10
frl 1 (allows ncos 1 and above), the rest is return

then 87
new
0
cdp
dsc
456
rli x return through the rest, in my 4 digit dial plan i would be sending 4560 thru 4569 to route 10


john poole
bellsouth business
columbia,sc

 

[takmsdsm]

so here is my RLI config

REQ prt
CUST 0
FEAT rlb
RLI 7

RLI 7
ENTR 0
LTER NO
ROUT 1
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 1
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ISET 0
NALT 5
MFRL 1

and here is my CDP settings in ld 87

REQ prt
CUST 0
FEAT cdp
TYPE dsc
DSC 408
DSC 408
FLEN 0
DSP LSC
RLI 7
NPA
NXX

does that look correct?

basically i want numbers 4080-4089 as fax lines to go to TN 13 0 of a universal trunk card in slot 13. what do i need to program as far as that goes? something in ld 14 maybe?

 

[takmsdsm]

also another interesting development, i cant seem to enable the TN in ld 32 or ld 20. when i do a "enlu 13 00" it coms back with "UNIT UNEQ

 

[johnpoole]

that is sending 4080 thru 4081 to route 1.. if you print tnb 13 0 what route is that built on.. if your adding a tie or cot on 14, then build a new rdb in 16 and add the trunks in 14

john poole
bellsouth business
columbia,sc

 

[Dougo123]

that means there is nothing programmed on 13 0. What kind of TN are you trying to enable?

 

[takmsdsm]

a tie line i assume. Basically we want to program a range of numbers (4080-4089) to go to a line (tie line i assume) that goes to a faxboard/server. Im sorry for being pretty new at this, if im not answering your question correctly.

 

[Dougo123]

What do you have in slot 13? What is the programming for rout 1 that goes to the server?

 

[takmsdsm]

slot 13 is a univeral trunk card. i used route 1 because it was the first number to come to mind, but i think that is wrong. I think i need to program a new route on 13 00. i think route 1 is on my other universal trunk card (the one i use for my RANs)

 

[Dougo123]

You'll need to build the rout, then build the trunk in the new rout. You can prt the routes in ld 21

 

[takmsdsm]

ok i think i figured it out...

here is my route..

REQ: prt
TYPE: rdb
CUST 0
ROUT 12

TYPE RDB
CUST 00
DMOD
ROUT 12
DES FAX
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK NO
PTYP ATT
AUTO NO
DNIS NO
ICOG OGT
SRCH RRB
STEP
ACOD 2007
TARG 01
CLEN 1
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
CDR NO
MUS NO
RACD NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
OHTD NO


PAGE 002

PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

here is my trunk settings

REQ: prt
TYPE: tnb
TN 13 0
DATE
PAGE
DES

TN 013 0 00 00
TYPE TIE
CDEN 8D
CUST 0
XTRK XUT
LDOP LOOP
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 0
RTMB 12 1
TGAR 1
SIGL LDR
STRO WNK
SUPN NO
AST NO
IAPG 0
CLS CTD DTN CND WTA LPR APN THFD
P10 NTC
TKID
DATE 12 JUN 2006

here is my new RLI settings

RLI 8
ENTR 0
LTER NO
ROUT 12
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ISET 0
NALT 5
MFRL 0

and here are my new CDP settings...

REQ prt
CUST 0

FEAT cdp
TYPE dsc
DSC 408
DSC 408
FLEN 0
DSP LSC
RLI 8
NPA
NXX

 

[takmsdsm]

when i call to test, i get fast busy however... did i miss something?

 

[johnpoole]

chg
rdb
TGAR x1


john poole
bellsouth business
columbia,sc

 

[takmsdsm]

changed that, still get fast busy


new rdb settings...

TYPE RDB
CUST 00
DMOD
ROUT 12
DES FAX
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK NO
PTYP ATT
AUTO NO
DNIS NO
ICOG OGT
SRCH RRB
STEP
ACOD 2007
TARG
CLEN 1
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
CDR NO
MUS NO
RACD NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

 

[johnpoole]

try the acod then the dn.. if you can;t access it direct and dial the dn it will not dsc..

that's a wink start trunk.. you should also be able to get on the trunk, here the wink, then dial the dn and get fax tone

john poole
bellsouth business
columbia,sc

 

[takmsdsm]

do i need to set up those 4080-4089 numbers anywhere else like ld 49 or anything like that?

2007 gives a fast busy. the DNs would be the 4080-4089 numbers correct?

 

[johnpoole]

4080 thru 4089 are no longer in your luvu table, because they are dsc's. 2007 gives you a busy.. that's a stopper, you removed the targ.. have you tested the trunks with a but set? remove the jumper, you should be able to get on each end of that connection a rec a wind (sounds like two quick clicks) on either end.. after you hear the wind you can dial any dn on either end.... if i connect a but set to my analog wink start tie, i hear a wink from my end, dial 4940 (dtmf) and get my station.. if i connect to the end from the far end switch, (avaya) i hear a wink, and can then dial Russ in that switchroom... test the tie and get back to me... add a star to this post so the rest of the gang will chime in...

john poole
bellsouth business
columbia,sc

 

[takmsdsm]

ok so i hooked up both a 500 phone and a but set to the punchdown block coming off the card. i do hear the two fast clicks. after that i can dial my extension and it goes through. If i try to dial to 4080-4089 from any phone externally or internally, i still get fast busies. but there is a delay of like 2-3 seconds before the fast busy is played.

 

[takmsdsm]

what else would you like me to check?