46xxsetting file

[punchtool]

does anyone have an idea as to why a 9608 would ignore the setphnol 9
I have 5610s and 5620s that work fine, I would like the 9608's and 9611' ss to work as well ( this is for dialing from missed calls etc.)

I know I can make the phones work with out a 9... this work around has its own faults.

here is the bit of the 46xx file that is not working on 9608 and 9611 phones
system is on 9.0

CODE
############# ENHANCED LOCAL DIALING RULES ###############
##
## These settings affect certain dialing behaviors, such as
## dialing numbers from the incoming Call Log or from web
## pages
##
## Dialing Algorithm Status
## Controls whether algorithm defined by parameters in
## this section is used during certain dialing behaviors.
## 0 disables algorithm.
## 1 enables algorithm, but not for Contacts
## 2 enables algorithm, including Contacts (96xx SIP only)
SET ENHDIALSTAT 2
##
## Country Code
## For United States the value is '1'
SET PHNCC 1
##
## Internal extension number length
## If your extension is 12345, your dial plan length is 5.
## On 46xx phones, the maximum extension length is 10.
## On 96xx phones, the maximum extension length is 13.
## This value must match the extension length set on your
## call server.
SET PHNDPLENGTH 3
##
## International access code
## For the United States, the value is 011.
SET PHNIC 011
##
## Long distance access code
SET PHNLD 1
##
## National telephone number Length
## For example, 800-555-1111 has a length of 10.
SET PHNLDLENGTH 10
##
## Outside line access code
## The number you press to make an outside call.
SET PHNOL 9
##
##
############## APPLICATION ACCESS SETTINGS ###############