3cx integration with IP office

[daras]

Hello,

Do you know what settings i 've to configure to create a trunk between avaya ip office and a 3CX server >
I 've an sip endpoint licence but this is for 3cx clients only, i know how to do it on the 3cx system but i cannot find any documents for the avaya side.

Do i 've to configure a sip trunk in ip office to the 3CX server without using a sip provider ?


Any help is muck appreciated


Thanks

 

[amriddle01]

You will need to use a SIP trunk licence for a trunk to the 3CX server, an endpoint licence is for a handset.
3CX is a competitor to the IP Office, so unless someone else has taken the time to try this and wrote a document on how to do it then a doc will not exist, you need to figure it out yourself.
It's not that hard to be fair, I worked it out for connecting to a Mitel 5000.

 

[ipohead]

You might find some useful info here

Smartphone and Avaya IP Office Integration Project

though it isn't a direct IP Office <> 3cx connection as older versions of IP Office didn't support SIP trunks.