Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

1616 Sets Disconnecting

Status
Not open for further replies.

Tom2129

Technical User
Feb 9, 2004
272
US
Hello
Client has an IPO w/r7, two locations are connected via fiber back to the main location with 1616 sets at these sites. Everything was working fine until the last month when one of the sites has lost the IP phones on two separate occasions, no other phones on the system were impacted and most of the phones came back on their own. Any direction would be greatly appreciated.
Thanks
Tom
 
Local network issue or a glitch on the link, if it was the system all phones would be effected and I doubt all phones in one location developed the same fault at the same time then fixed themselves :)

 
I believe everything there is DHCP....where would we look for the conflict?
Thanks
Tom
 
More Info
Just heard from the account that two 1616's which used to be at the location that lost service, but have been moved to a different location, also lost service yesterday when the original location went down....ugggg!
 
Sounds like two faulty phones, replace them

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top