I have just received an IPO 406v2 running 3.2(17) and everything works great. if I plug in the Digital station 16 to expansion port 1 using the supplied cable, and plug in a phone(5410d);
The Phone powers up,
The screen says please wait.
The expansion unit shows up in the manager app.
The phones never get past "Please wait" and Show version 2.00 at the top of the screen.
The expansion unit says it is revision 4.1 when I run the upgrade wizard, but it will not allow me to upgrade the unit (it is greyed out). Please tell me I am missing a simple step here. I am used to working in a complete IP environment so this is a little new to me.
Shawn
The Phone powers up,
The screen says please wait.
The expansion unit shows up in the manager app.
The phones never get past "Please wait" and Show version 2.00 at the top of the screen.
The expansion unit says it is revision 4.1 when I run the upgrade wizard, but it will not allow me to upgrade the unit (it is greyed out). Please tell me I am missing a simple step here. I am used to working in a complete IP environment so this is a little new to me.
Shawn