Search results for query: *

thanks Doktor I managed to figure it out thanks very much

I have managed to figure some of it out I had forgot to give the stations permission to access VMIB in PGM 113 then I run into VMIB Busy but I reset the board and can now record the messages I am now trying to figure out the settings in PGM 231 for my DDI numbers I current have them set to hunt...

I Have installed my VMIBE board as follows: -> Backup the database by ipLDK Admin - and save the backup in a safe place. Then: - Power off (Power cable removed!) - Insert in a free slot (there are 3 free) - Power up (insert power cable). - Log in with PCADMIN - Set-up slot type to VMIB (PGM101...

Opps ignore the previous thread apparently the data on the TCP port is coming through in the wrong format the tech guy I deal with is asking for the phone data in CDR or SMDR Format is there a way to have the phone board communicate in this format via the COM port? or am I looking at the wrong...

hi guys its ok I figured out that the system was using TCP Port 9001 so both softwares are now getting the information I need Not sure how to delete this thread now

Hi Guys I am having a wee issue that you might be able to help me with. in my IP LDK 100 I currently have it setup that the CLI is connected to my main computer from the MBPN Board via the com port as we are a taxi company our despatch software uses the CLI data to link numbers to our jobs...

I managed to get the IP address from one of the terminals so I am going to use a LAN connection instead of the serial I presume it requires a cross over cable

Kit is running firmware 3.7dh and I am trying to use pc admin C.7Ag I know the pcadmin and ldk firmware should match but I have been unable to find 3.7dh pc admin Thanks for your help

I have been trying to use a serial cable as I am unsure of the IP address I tried to get it through one of the terminals but i an unsure what to do when it gets to logging on as admin at a terminal and any buttons I press on the terminal just beeps

thats the log in details i have been using here is the screen shots of what password Im not sure of and what happens when I use the default admin password password comes up after selecting Connect(SIO) then inputting com settings then this is where it hangs once i input the admin password

I seem to be having connection issues with pcadmin I am using a USB to rs232 serial cable the com port settings are correct but it hangs when trying to connect It comes up asking for a password I just presumed this was the same as the admin password is this correct or is there another default...

Hi guys So I have bought a VMIBE card and about to install but just want to confirm a couple of details... From my understanding the installation of the card is: - Power off - Insert in a free slot (there are 3 free) - Power up - Log in with PCADMIN - Set-up slot type to VMIB (PGM101) Also...

Thanks doktor

Hi guys looking for some advice we currently have a 1 Rack unit of ipLDK 100 with 3 handsets running off of it with 1 main number and 8 or 9 DDI numbers (cant remember off top of my head) behind it all the calls come into the main number and calls just stack onto the DDIs I am looking to...