IP LDK 100 CLI Enquiry

[seatlion]

Hi Guys

I am having a wee issue that you might be able to help me with.

in my IP LDK 100 I currently have it setup that the CLI is connected to my main computer from the MBPN Board via the com port as we are a taxi company our despatch software uses the CLI data to link numbers to our jobs however we have just implemented a call stats software to keep track of how many calls we get, miss etc

I am trying to figure out a way to piggyback on the same connection so both programs can use the data being sent from the board to the computer is there a way to do this via the comport or can I also get the information through the LAN port that is on the MBPN Board

sorry about the hazy description the phone system is still a wee bit new to me.

I can provide port information etc in need be

any help is majorly helpful thanks in advance

 

[seatlion]

hi guys its ok I figured out that the system was using TCP Port 9001 so both softwares are now getting the information I need

Not sure how to delete this thread now

 

[seatlion]

Opps ignore the previous thread apparently the data on the TCP port is coming through in the wrong format

the tech guy I deal with is asking for the phone data in CDR or SMDR Format is there a way to have the phone board communicate in this format via the COM port?

or am I looking at the wrong TCP port altogether

again any help would be greatly appreciated