Search results for query: *

PS, How about receive digits for your target lines?

Hey Ski,if all else has failed try giving Charlie or Wes a call.

If you have a Valcom 3 zone page unit, why are you dialing F62-1/2/3/4 etc.etc.???? Go with a CO trunk port, set the Valcom for dial tone. You go off hook, you get Valcom dial tone and you Dial 0 for "All Page", Dial 1 for "Zone 1", Dial 2 for "Zone 2", Dial 3 for "Zone 3".

Yup! Program F * 2, Hit a blank button, Dial bosses intercom number! It will act as a BLF and is also a quicker way to transfer.

I have heard numerous times on this forum that the customer reboots his system when he has a problem. In my opinion this only compounds the problem and makes it more difficult for the technician to trouble shoot because when the technician arrives at the customer premise there is no problem. I...

If you dont know how to use "Auto Set Relocation" or if you use it incorrectly, you will end up with Extention Numbers dissappearing into "Never Never Land" I've gone on plenty of service calls regaring this. How do I correct this problem you ask? I look up the port, swap the crosswire and...

P.S. Thats to program it. To use it you hit transfer, then the cap button, wait for ring and hang up. Your screen should say "Call Transfered". It also acts as a "Busy Lamp Field".

Feature * 2, press button on CAP, then dial intercom number.

Why does every one like to just pull the plug to reboot voice mail???????

Build your own filter and deny 9-1 or deny 1. It will depend on if you are using Line Pools or COT's to dial out.

Swap the the crosswire! Stay away from "Auto Set Relocation"!!

LOL!! Hey coworker! From reading your other posts I realized who you are! It sure is a small world. I'll give you a hint. We try to help out "Naughty Techs" when they get in trouble! ROTFL!!

Hey luv2ski, LOL, We're coworkers!! Give you a hint. We try to help the "Bad Techs" when they get in trouble!! ROTFL!!

I think you could do Feature 3 (conferance) then 9 plus your number. Or Feature 71 (link) then your number. Just a thought.

I vote for trabra. You can then program an Outgoing key. Do Feature * 3, Hit a button and Hit Feature 641. It will grab a line from Pool A.

I have the same scenario with a group of banks. They do not have Nortel voice mail. They have one centrex line assigned to each phone with Octel Voice Mail provided by the local phone company.

Sounds like a bad channel on the channel bank.

LINK is Feature * 3, press a buton, Feature 71.

Just did a software upgrade on an 0x32.Had that problem. 6.1 needs NRU 10.1 I downloaded it from my companys web site. Don't know if you can down load it from Nortels web site.

jeffcrose, You are right on the money! Change your RADS to operator assist.