Recent content by Yooper46

Found the solution. Sorry to bother. We deleted Normal.dot and everything back to normal. Thanks

Word will not open and we get the following error text: AppName:winword.exe AppVer: 9.0.0.6926 ModName:winword.exe ModVer:9.0.0.6926 Offset:0040ea0c We removed Office, repaired Office, Did a Restore to Windows XP back to when we knew Word was working and it still will not load. All other...

Great - worked like a charm!!

We have two HP LJ2100 tha have the IP address of our old network in the 600N network card. I want to add these printers to our current network. I have been searching HP site and Google all morning trying to figure out how to change these. The printers would be installed on our Windows 2003...

Just set up this new home router. Get the internet fine. Can't get my email. Not connected to router email works. I tried Netgear suggestion of pinging pop3.direcway.com and using subsequent IP address, but that did not work either. Any other suggestions? Thanks.

Thank you. I will try this and see how it goes.

I am a novice when it comes to tape backups so... I have a Windows 2003 server, ARCserv 11.1 and a Quantum Superloader with two magzines which hold 8 DLT tapes each. At the moment I am backing up a third of the HD to each of 3 tapes which I label individually. In otherwords, I currently have...

Problem solved. Tape drive was set to sequential and should have been set to random. Then I had to reinstall device in ARCserve.

We have an ATL Superloader with 2 magazines which hold 8 tapes each. It is the LDP1 model. We use ARCserve 11.1. Up until this week, while I didn't have the backups completed the right way, at least I was getting them done. (i.e. have not figured out the sequential backup yet - that is the...

Thanks for the reply. I think I just figured this out. The tapes were formatted in an old tape backup. In order to use them I would need to de-gauss. It is cheaper to buy new tapes. I was able to format the tapes in the old backup machine today and they were listed as read/write. As soon...

Just installed this new unit with 16 tapes. In CA ARCSERV 11.1, in Devices, it shows the 16 slots with tapes. I put them in groups Monday, Tuesday, Wednesday, Thursday and Month 7 with 3 tapes each. When I go to do a backup it gives me the message "unable to find any media that can be used in...

Thanks for all your help. I think I will follow what the Dell rep suggested.

My new PowerEdge 2800 has two 36 GB SCSI drives on RAID 1 and 3-300 GB with RAID 5. For some reason Dell created a logical drive on the 36 GB drive and I have a 12 GB "C" and a 21.7 GB "E" drive. I have nothing on this E drive. Using disk management, can I just delete the logical drive and...

This post is old, but I am now having the exact same problem. Unfortunately, the link is no longer valid. Can anyone direct me to the answer to this question. TIA. - Yooper

Thanks - just what I was looking for.