Recent content by wirednet

Checked with the carrier but no solution. This is the first time I had run into this. You were correct curly cord. Changed in System Programming/ Feature Settings. Thanks

My customer has a Nortel MICS the changes date when the 1st CO line rings. It alters the date completely, no idea why. I changed out everything except the call pilot vm, replacing MICS ksu, caller ID card, 7.1 software. It still changes the time on incoming calls. I plan on checking the call...

How do I change the number of rings before transferring to Auto Attendant. I have an older Electra elite 192 that has been working fine for years and rarely needs service. I have added parts but never any major changes (except a new voicemail card a few years ago). Someone tried making...

I created a transfer internal for option 7 to ext 340 and set 340 to Aux ring y. The aux ringer doesn't ring the overhead paging and the only set that can answer is 340. Is there a way to ring overhead from the CCR for anyone to pick up?

I would like to try set up an option to press 7 in the CCR tree to reach an overhead ringer connected to the AUX port on an MICS. Does anyone know how to do this in a way that incoming callers who press 7 can be answered when people hear an overhead ring? MICS 6.1, Callpilot 150 3.

If you are using a phantom TNs on CS1000 possibly use of CLS CFXA. Not much experience using SIP any other ideas anyone?

Thanks John I will look for keypad timeout, since all else should be unchanged.

Need more details. How do you "dial through"? Do you have MCDN on the BCM? Routes? ETC

Is it a matter of NARS BARS that users can not break dial tone on a second consecutive ACOD dial? A user (on Option 11 with a TGAR of 0) accesses a PRI route (with a TARG of 1) by dialing ACOD 720 to get to a remote location. Then the call is on an Option 81. The user accesses an additional...

See if this post update works... resolved by removing ringing at reception and keeping the night group. Set up non-vmail sets to ring during the day- the receptionists cordless and others.

I am going to try all again tonight thanks.

I am getting voicemail from reception. A I tried with the line having a prime and without. It is still ringing at reception.

I set up a ring group (003) on line 31 to ring during the manual "night ring" period. It should ring an aux ringer and a couple of sets in a plant and shouldn't go to voice mail or ring reception. But it still rings reception and goes to voice mail. Can we get this to not ring voice mail/...

Search or post the BCM forum for more information. Try using a hookflash Feature 71 then recording.

I am pretty sure that the forwarding is all done in the Callpilot server itself. The My Callpilot server just allows you to adjust settings on the Callpilot using the My Callpilot interface.