Recent content by wayneled

Thanks for the reply the extension i am transfering to is a subscriber. it's an ia770 in a stand alone s8500c. extension is local. the problem doesn't happen if the customer is at this desk, calls vmail, logins in, then does *t. so it is some sort of restriction in the pbx. the trace is not...

after logging into my mailbox,i hit *t, am prompted for extension number, i enter number followed by #, hear the name announced, told to please wait. then i get "transfer cannot be completed" i can transfer out of an AA,and *t from a greeting. enhanced cover 0 set to yes. no operator...

thanks

start -ac

When using dialup to an LX, after logging into the web browser with sappp, and after opening messaging, then logging in with sappp, i get a "could not change to home directory" error message and can't procede. any ideas, or know how to use ASA to access? (port 23 doesn't work) thanks

you are correct. just ignore the error message and it works. I wasted a lot of time on that one. lol thanks for all repsonses

give a shot a busy/release the trunk group is the signal group in service?

all the above docs refer to pre-rel CM4. the problem is that when the server tries to connect to the pbx, I get an error that the BCMR login I made with prof18, doesn't have the right permissions. the docs all refer to CM3 or below. not any help with the new way to add logins with R4 the...

any luck with this?

to my knowledge, no.

i don't mean ping the phone. if you know the ip address of the phone and its working ok, then you get the dhcp conflict error, unplug that phone, and ping the ip address it had. you shouldn't get a response since you unplugged the phone. if you do get a response, the address is assigned to...

Prologix where availble with two offers, A and B. not ever circuit pack that worked in B worked in A. it sounds like you had a B, but maybe when you loaded license file for additional RTU, changed it to A.

i think you would be able to do this two ways, neither simple. 1) use smnp traps on the LAN to monitor alarms. Have that program that monitors the LAN outcall. 2) use the contact closure on the IPSI cables. connect them to some 3rd party device that would outcall when contacts are closed.

what do you get when you try to login? a 404 error?

i use IE6 to download files, i just delete the brackets. the install wizards don't work too well with IE7.