Recent content by tbhatt

Try the Altaddr command on your Citrix server. There is documentation on how to use it on Citrix's site.

Why is XML running on 8080 and not on port 80? If this is the case, in your NFuse.Conf file did you specifiy port 8080 as the port for the XML communication?

It appears that your Print Spooler might be causing a memory leak, you should use the UPD drivers that come with XP and nothing else. As stated above your FR3 solution might not be the best one out there for now. Have you looked for Citrix Hotfixes as there are some that refer to the Print...

What version of the client are they using?

Rather then spending the money on the Citrix Secure Gateway software a better solution would be to SSL enable the server via SSL relay. This will let you communicate via 443 for all traffic and there you will not need to open 1494 for anything. The SSL Relay will communicate to all servers via...

Check your internet settings under Advanced in IE properties to make sure that the "Do Not save Encrypted Files to Disk" is not checked.

If i am not mistaken the setting for NFuse timeout is set in the nfuse.conf file on the web server. I forget the exact location but it is nfuse.conf for the settings.

When you change regional settings its on a server basis, so it would be global. For example everyone would see English as default and if a word translation isnt avail, it will look for the next installed language. Recommendation, Have a citrix server setup for each region and make it the...

Citrix does not support imaging the server with Citrix preinstalled on it. However the server name key is under HKLM \ Software \ Citrix \ IMA in here you will see a value Server Host. Change it there and restart all IMA services running. It is not recommended doing it this way, since...

I do not believe so, i would say upgrade all boxes to XP and then put the servers into IMA mode only, this way you have only one way of using licenses which is through the Data Store.

Go to the internet properties and then move to the advanced tab. Make sure there that the option "Do Not save encrypted files is not checked:. If it is remove it and hit ok. Restart all browsers that maybe running. This will not allow files from NFuse to save to disk, since NFuse encrypts...

Eric, Make sure that the ica file that the client recieves has the following 2 sections on it. SSLEnable=On SSLProxyHost=servername.domain.com:443 where the servername.domain.com is the citrix server. TB

Can you make sure your devices arent showing up in Device Manager under Medium Changer, if it is disable it and try rebooting the box, then reconfig. the Device. TB

There is an entry that you may need to enter in your local lmhost file in order for it to see the domain. I had similar issues with this and was told by Microsoft to add a line in there, it had numbers and stuff. It is individual to enviroments, my recommendation contact Microsoft support and...

That is a Terminal Server license message, is your Terminal Server activated with Microsoft and did you purchase Terminal Server CAL's for the users. When setting up a Citrix box you need to purchase Microsoft CAL's for any program that is MS, as well as Citrix CAL's for ICA connections. TB