Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by joeymcse

  1. joeymcse

    Avaya IP Office and Cisco SA540

    Hello, I have a VPN tunnel established between a Cisco SA540 and a Cisco SA520. I have 6 Avaya IP phones connecting to a IP Office via the VPN tunnel. Troughout the day maybe 3 or 4 times a day the Cisco SA540 (sits on the side where the IP phones are connected) restarts. The Cisco SA520...
  2. joeymcse

    9608 phone does not have a "Hold" or Conf" button

    I guess i did not configure everything perfectly [wink] because the one phone that I plugged into the main location does not have the buttons ether. I'll check into getting the latest firmware and how to load it and see if that fixes the problem. Thanks for the help!!!
  3. joeymcse

    9608 phone does not have a "Hold" or Conf" button

    Thanks for the quick replies!! They only show "Drop" when in call. I thought the latest firmware was pulled from the IP Office when the phone logged in?
  4. joeymcse

    9608 phone does not have a "Hold" or Conf" button

    I just installed 4 9608 phones in a remote office. The phones are working normal except they do not show a "Hold" or "Conf" button??? Any thoughts would be most helpful!! Thanks!!
  5. joeymcse

    Cannot upload system files to SD card getting error...

    Hello everyone, The SD card was reformatted, rebuilt and all is back to normal!! Thanks very much for your help!! Please feel free to close this thread.
  6. joeymcse

    Cannot upload system files to SD card getting error...

    Thanks to everyone for the information. Is there a way to search the FAQ's on this site so that I can find the correct steps to recreating the SD card?
  7. joeymcse

    Cannot upload system files to SD card getting error...

    cruzades... I don't think that the card is locked. Before upgrading to R8 I upgraded 6 to the latest version of 6 and I did not have any problems.
  8. joeymcse

    Cannot upload system files to SD card getting error...

    I upgraded from version 6... Here is the trace that you requested. ********** SysMonitor v10.0 (44) ********** ********** contact made with 172.17.2.7 at 22:51:13 29/7/2012 ********** ********** System (172.17.2.7) has been up and running for 12hrs, 10mins and 40secs(43840143mS) **********...
  9. joeymcse

    Cannot upload system files to SD card getting error...

    System upgrade throws the same error when it gets to the point where it copies the files to the SD card.
  10. joeymcse

    Cannot upload system files to SD card getting error...

    if the system are read only then i'm really confused because that means the files would never get updated even after the upgrade to R8. Is there a way to remove read only so that the files can be updated?
  11. joeymcse

    Cannot upload system files to SD card getting error...

    We have a dedicated server running VMPro and Manager, that's on the same subnet as the IP Office. I'm connected to that server when trying to upload the system file to the SD card.
  12. joeymcse

    Cannot upload system files to SD card getting error...

    Is there a way I can put all of the required onto the SD card from my laptop?
  13. joeymcse

    Cannot upload system files to SD card getting error...

    The file writer ip address is set to the ip address of the pc i'm using to upload the files. It's the same pc where Manager is installed.
  14. joeymcse

    Cannot upload system files to SD card getting error...

    I'm connected to the IP Office via Manager and doing the following: File, Advanced, Memory Card (Embedded File Management)and after I get connected I go to File, Upload System Files Then I get the error. Behind the error window there is a file copy window and it's trying to copy the files to...
  15. joeymcse

    Cannot upload system files to SD card getting error...

    Updated IP Office to R8 and when it tried to upload the system files it throws the following error: HTTP request failed: 405 Method Not Allowed Has anyone seen this error??
See more

Part and Inventory Search

Back
Top