Recent content by jake2k2

don;t ever use any home version of windows like 98, ME, XP-home, they screw up alots things at times,

did you check the system BIOS to make sure there is no power management anything setup there ?

what is the phyiscall memory and page file size set to ?

does this happen all the time ? have you recently installed or uninstalled a program application ? this error meaning the NT is detected an error of some sort, if this kept on occuring, you should reinstalled the application (if any) and then just get a clean uninstall

you have to enable : Client for Microsoft Network printer and file sharing in the network properties J

you need license for both the server and client, besides the server software license, you need to purhcase what's call the CAL (client access lisense) per desktop there are two different type of lisensing per seat or per server, depending on if your company is going to grow over 300 people and...

does this error also come up when the screen saver kick in ? (ie. when you set it to activate after 5 min) if so I think I seem it before, I also have tried the reg hack, it didn't work, so I just disabled the screen saver if all else fail, try to re apply the service pack see if it help

does this error also come up when the screen saver kick in ? (ie. when you set it to activate after 5 min) if so I think I seem it before, I also have tried the reg hack, it didn't work if all else fail, try to re apply the service pack see if it help

what type of processor are you using for your system, are they in the HCL list ? I installed mine with 2 P2-400 just worked on its own. there is also some procedure from Microsoft if you go from single to dual processor but souunds like yours is a new installed

one question, when you mean 'restore to another sever' exactly what are you trying to restore ? first of anything you should have a good backup on the data on the old server, any files you care about, excluding the windows system file, because they are not usable in another system (unless you...

first of all I think, one NIC can only have one IP address, you need two NIC only if you are connecting this server onto two different network (two different subnet or gateway) to access the webaccess (I assume this is the same of access the internet with a regular broswer ?) you should check...

are you sure the modem dial up fine ? some of the modem would just "make dial sound" appears to you like its dialing, have the modem dial a regular phone number see if it rings

have you make sure the shared drives still shared ?

make sure they are on the same subnet if they are using TCP ie if the server has address of 192.168.1.1 make sure the win2kpro machine has the address in the 192.168.1.Xs (not the same address with the server obviously) fill in the TCP---> advanced ---> WINS section on the win2kbox with the...

so you may have the problem in the local profile, did you recreate the NT user account with the same name ? if so, make sure you delete the local profile folder on the XP machine so you can a clean start when she login into her "new" network account, then try outlook