Recent content by hohumIPO

analog extension, this is the way it is

hmmm seems to do that quite well!

Hi There, IP 40anything Firmware 3.1(56) Have noted the Forward unconditional feature now brings the forwarded call back to the originators voicemail box. Anyone else noted this and is this new "intended purpose", rather than actually forwarding the call unconditionally as the name of the...

if interrupted during the process where it comes up on the screen and says "do not unplug or turn off" then...... they are a great bin ornament!

yeah, don't go near 3.1 yet :-)

to date I have not encountered any bugs worth a mention in 3.0(69). What bugs have you found?

IP lines are required to be configure between both units (so they know where they both are :-)). Making sure they have unique outgoing group ID's set for ease of use. Then in the 406, change it's default dial shortcode (the one that is a ?) to use the line ID of the IP line pointing to the...

you need to check in the programming where it (your IP Office) is being told to look for the time from. Usually it is the machine with Manager and voiceail installed on it. Change the time on that machine and then using manager, reboot the IPO. Time should be OK after that

what version?

yes, after the coverage timer hits, works quite nicely

My current employer uses intuity mode whereas we deploy IP Office mode only and my previous employer only used IP Office Mode. I personally HATE intuity mode. While it does have more features it shits me proportionatly. I find it is somewhat more time consuming for the end user to navigate...

Ps. only works on digital extensions, I.e. there can be no analog extensions in the mix, something they took away that they plan to re-introduce!? *Shrug*

yes it covers to the other extension once the idividual coverage timer expires on a per user basis. Make sure this does nont conflict with no answer timer (check the help file, it is all there) You will need to make sure you have the covering extension setup under the digital telephony Tab.

stupid question but do you have the power pack for it?. Sometimes takes a little while for EU24 to start working

you will need to do a few things, first you will require a PSTN card in the 406. In Manager, change the outgoing linie ID for the line that the GSM device is plugged into to an ID not already being used. Plug the GSM device in. Add a new LCR route if not already there to the following for...