kwing112000
Vendor
I have IPO V2.1(15) I know that I need to upgrade but I can not get the time to update after daylight savings. I have tried to set it to 3 different computers. Anone ever seen this before?
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Time update
- Thread starter kwing112000
- Start date
- Status
you need to check in the programming where it (your IP Office) is being told to look for the time from. Usually it is the machine with Manager and voiceail installed on it. Change the time on that machine and then using manager, reboot the IPO. Time should be OK after that
SuperJenks
Vendor
The IPO seems to always need a reboot for time changes in my experiences.
- Thread starter
- #4
kwing112000
Vendor
Thanks for the info. It turned out the network admin turned the Windows time service off on all PC on the network. I turned it on in the server theat manager is on and rebooted and everything is fine.
Thanks
Thanks
yeehaababy
ISP
How many times do the IT guys cause probs without evan realising it??? Changing iP's subnets etc...
- Status
Similar threads
- Locked
- Question