Recent content by eguander

Hi guys. I have doing an upgrade in an Avaya Aura Communication Manager. The main servers are s8370 with 5.2.1 (in few days I will change it for DLG7). I have 3 ESS (2 DLG7 and 1 S8800). To do this task I have to upgrade all the ESS servers to CM 6.X. I can't do it at the same time (obviously)...

Hi Kerchak ,in the first time congratulations for your handbook , it's very good.We have configured the avaya s8700 and the asterisk likely you explain but doesn't work.When you call asterisk appears " network failed" , but the signaling group pass ! Can you help us? anything idea ? Thanks .

Hi,the problem has resolved yesterday , the solution was in the vlan of cysco . Thank you all . Regards, Eguander .

hi , "cnc on" in the promp of the ipsi ? this command no works ! Regards, Eguander.

thanks justinsm2 but the gateway of the IPSI 3 is ok.The IPSI1 ( 10.148.128.1 )and IPSI2 ( 10.148.128.2 ) are in diferent LAN than the IPSI3 ( 10.148.144.1 ) but the ping run ok in and out .

Hi,wich port needs IPSI to link with s8700 ? Perhaps is the FIREWALL's server ?

Hello, I have a problem with a G650 with an IPSI that is in another LAN that the S8700 and Other G650 and IPSIS ( IPSI1 and IPSI2 LAN 10.148.128.X ). There are a VLAN betwen the 2 LAN for connect the G650 and IPSI 3 ( 10.148.144.X ) but the control server don't see it.I make pings and all works...

The solution was repair the pins in the backplane,that were broken. Thank you anyway.

Hello,I'm programming one SI v9.5.This machine was installed in France and now I'll installed in Spain.I have changed the " SYSTEM CUSTOMER COUNTRY OPTIONS "and I have configured like spain, but when I change the configuration one alarm major has jump, the ring generator.The alarm doesn't not...

Thank you very much ! it works ok ! Best regarDs, Eguander

Hello , I will hide the number and name from one station directly to another , it's possible ? I made changes to the cos with client room " Y " but doesn`t works , anything idea ? Thank you.

I have programed this but doesn`t works , the number of the station doesn't hide it . Are there anything to do more ?

How can I hide the name & the number of a station from another ? Best regards. Eguander .

Hello , How can I configure the second call apearance of a ISDN extension ( BRI LINE TN 556 D ) ? The stations works ok but only acepts one call. Thank you. Eguander .

Hello , I can`t make that the TN556D works properly , the stations are disconnected and I don't known what to do.Any idea ? To remember us I have installed an TN556D ( BRI EXTENSIONS ), I have wired it but doesn't work . Than you. Eguander.