hide number & name

[eguander]

Hello , I will hide the number and name from one station directly to another , it's possible ? I made changes to the cos with client room " Y " but doesn`t works , anything idea ?

Thank you.

 

[98Converter]

Found this...


Masking the station number on internal calls can be controlled by CLASS OF SERVICE. Establish a new COS to turn on CLIENT ROOM and change the SYSTEM PARAMETERS-HOSPITALITY and set DISPLAY ROOM INFORMATION IN CALL DISPLAY to YES. When the new COS is assigned the calling party station number that usually appears in the bottom of the display is replaced by the station room information page 3 of the station form. The station "SITE DATA: Room" field should be cleared or put the main number the people should be calling.

NOTE: If the station NAME field is blank outbound calls will replace the blank with the station number. Insert something, usually a period, to keep this from happening.

Hope this helps,
Chris

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[eguander]

Thank you very much ! it works ok !

Best regarDs,
Eguander