Recent content by defh

Morenot, I apologize but I cannot post that file. It contains information that I cannot share because of corporate policies from my employer. I posted the Excel file which has 80 percent of the config. Also if you want you can ask me and I'll be glad to fill in the blanks and share more...

Morenot, you can access most of the config on the attached link. defhhttp://www.mediafire.com/?wnmdoenglnt

Thanks guys... There are a lot of things to be considered now but at least I got the calls going. I did see calls originating from the IPO that could not be picked up by the CM. However, all calls originated from CM were answered by the IPO. Call quality is a concern now, but at least we got...

I have the Use Network Topology Info set to LAN1. do you want me to change that?

I just got one call through (from IPO to CM)!!! STUN off did it... We are now checking from CM to IPO. Will report more in a few minutes... Defh

turned STUN off (Open Internet). now it rings on both sides but I still get no audio. Defh

Im getting this for outgoing calls(not sure if applied filters correctly): 1365585mS PRN: Monitor Started IP=152.220.243.6 IP 406 DS 5.0(15) ADC (IP Office: Supports Unicode, System Locale is esv) 1365586mS PRN: LAW=U PRI=0, BRI=0, ALOG=8, ADSL=0 VCOMP=8, MDM=0, WAN=0...

I believe we are ok on the Cisco side. The IT person went through the config. The calls get to the IP office, it seems it is only the IPO traffic going back to Cisco that is not working. defh

amriddle, I hear what you are saying regarding the blocking, so I will insist on having this checked. The 0.0.0.0 route covers all so the 152.220.243.0 should not be needed, correct? Yes they can both be pinged. Rgds, defh

Hi, first of all, thanks for taking the time to answer. I apologize for posting incomplete information, but I'm still new to all of this. Let me try to answer your questions and also provide most of the info I currently have. Please disregard the original sysmon data. I will try to get new one...

Hello forum members, I´m new to the forum and I wanted to share with you a problem that I can´t figure out. We have been using an IP office 406 (recently upgraded to 5.0) in one of our locations (Location A) and we have a second location (location B) that has a Cisco Call Manager. I have been...