Recent content by debbieeees

Create a template, insert your list box, then you need to protect the document. Once protected, the list box is ready to go.

i think i finally got it. :D the formula seems to be: =IF(0.25*E4>0.06*F4,0.06*E4,0.25*H4)

Ok, this is what we have to do. The way the contract reads is: The company is matching your contributions at the rate of 25% of the 6" that you contribute. How would the formula go to calculate the company match amount?

thats it, you rock! thank you so much!

Hi all, Does anyone know how to create a formula that will compare the amounts in two cells? There is the amount the person deducts from their checks and the amount the company will match (which is .25 on a dollar up to 6% of their gross). I'd like the formula for the employer match amount to...

What would cause all of the display phones to show "Check List" on them?

Wow...I had to doublecheck your name because I thought it was a post I made a few months ago. Obviously I went through the same thing. Same board, AMD 2400+, ddr333, then 400...Absolutely EVERYthing brand friggen new. It powered up the first time and allowed me time to format a 120g hd but...

I made a copy of the original harddrive profile (on the old HD), named it 'new tower' and when prompted at boot up I answered 'none of the above'. Worked quite well. :) Thanks again for your input, I really appreciate it!

It's because you did not uninstall the old version FlyVideo's driver. Uninstall the driver in advance, and then install the driver again. Please follow below steps to install the updated driver (assume that you unzipped the download driver files to a new folder): Step1. Un-install the...

Hi Wolluf...I used (in both instances) a little program I downloaded from ZDNet called HDCopy. Pretty straight forward. Your right about the msdos.sys file, it was minimal to say the least. I went ahead and edited it manually, attrib'd it back and lo and behold...works great. Funny thing is...

Oh..and make sure you have the lastest drivers for your TNT video card. http://www.nvidia.com/view.asp?IO=winxp-2k_30.82

Do you have all the Service Packs installed? The type of mouse you have may have something to do with it.

I made a copy of the old WD drive. A clone basically. No problem on the first machine

I'm replacing older WD harddrives with a new Seagate 40gigs on a number of PII 350mhz workstations. The first one I used the Promise ATA controller, to bypass any bios issues, and it worked perfectly. I'm now on the next one and I'm using a SIIG ATA/100 controller card. Fdisk and partition went...

If you are comfortable entering your systems bios you may want to check to see if the usb ports are indeed enabled. It may turn out to be a simple fix. But please! only enter the bios if you are familiar with the different settings. Just like the windows registry...one wrong setting and your...