Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by cgarcia

  1. cgarcia

    VPN Routers

    When a VPN is created site-to-site by means of Internet having used to router Cisco 1750, the users of any site can have access to Internet in addition to the VPN and as router is formed? Regards... Charlie
  2. cgarcia

    TABLE OF DIGITS "ABCD" DEFINITY G3

    Hi I need the table of digits ABCD for signaling of the equipment Lucent Definity G3. Thanks... Regards.
  3. cgarcia

    The PBX Lucent Definity G3 support

    The PBX Lucent Definity G3 support Telephony signaling E1 R2 in the version 6i????? Thanks..
  4. cgarcia

    Lucent - Cisco

    i connect router cisco 3640 with a Lucent Definity G3. i used 1 Channelized E1/PRI in Cisco and DS1 (TN464F) in PBX. But, the configuration in Cisco router is: ds0-group 1 timeslots 1 type r2-analog r2-compelled ani and, this configuration not work correctly. The trunk line after of a time is...
  5. cgarcia

    Lucent - Cisco

    Hi... I have a problem. Cisco say in a document: "Lucent Definity G3 PBX does not support R2-Digital Line Signaling (ITU-T Q.421). It supports R2-Analog version (ITU-T Q.421)." Is true???? Thanks...
  6. cgarcia

    E1 PRI connection with Cisco Router

    Hi... I have a similar problem. Anybody can help me!!!! I need a example configuration for this connections. Regards..
  7. cgarcia

    Help!!!!!! Cisco Router - Lucent Definity

    Hi.. I used ds0-group 1 timeslots 1 type r2-digital r2-comp ani but, Lucent don't support r2-digital, only analog (Ref. http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/sw_conf/pbx_int/36lde1r2.pdf) But, i configure the Cisco router with digital signal, because the...
  8. cgarcia

    Help!!!!!! Cisco Router - Lucent Definity

    The medium of connection for this router and definity, is a RJ45-BNC cable (RJ45 in Router and BNC in definity). I used CAS signaling. (E1 R2) I need a example configuration for this connection... Regards.
  9. cgarcia

    Help!!!!!! Cisco Router - Lucent Definity

    HELP!!! Hi, I have a Router Cisco 3640 with NM-HDV-1E1-30E and PBX Lucent Definity G3 V.6i. How to connect Cisco router with PBX??? I need a exmaple (configuration) for this connection??? Thank's
See more

Part and Inventory Search

Back
Top