Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ncp500 no voice

ctamir

ctamir

Programmer
Joined
Feb 11, 2018
Messages
270
Location
IL
hi all
my client got ncp500 with about 60 ip nt phones
on outgoing call everything work well
in intenal calles some calles have no voice they hang up and call again and voice work, sometime work and some time not.

anyone know that issue?
 
Sort by date Sort by votes
Increase the UDP timeout in your router + 180 seconds minimum?
 
Upvote 0 Downvote
EMJP said:
Increase the UDP timeout in your router + 180 seconds minimum?
Click to expand...
thats happend only in internal calles
why should change at router?
and if needed 180sec time out of what?
thanks
 
Upvote 0 Downvote
You need to enable the phones via VLAN.
60 KX-NT IP phones without enabling them in VLAN is a lot.
 
Upvote 0 Downvote
Mike_K said:
You need to enable the phones via VLAN.
60 KX-NT IP phones without enabling them in VLAN is a lot.
Click to expand...
the telephone system is on oheer network and not on the computers network
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

ctamir
  • Locked
  • Question Question
sip ext ncp500
Replies
6
Views
868
ctamir
ctamir
ctamir
  • Locked
  • Question Question
NCP500 DISA - EXTRACT WAVE FILES
Replies
3
Views
493
kizo
kizo
txteck
  • Locked
tva-200 device dial out from voice mail.
Replies
0
Views
300
txteck
txteck
Justin RSU34
  • Locked
  • Question Question
NS700, no message lamp and no voicemails
Replies
6
Views
1K
Justin RSU34
Justin RSU34
powercom
  • Locked
  • Question Question
No Ringback tone
Replies
0
Views
268
powercom
powercom

Part and Inventory Search

Sponsor

Back
Top