IP412 LAN2 IP412 LAN2 IPOMonkey (Programmer) (OP) 2 Feb 05 14:40 What am i doing wrong!I cannot connect using manager when i am plugged directly into LAN2 but everything is fine when plugged into LAN1. The system is using the default IP Address?Do i need to do anything for LAN1 to communicate with LAN2? RE: IP412 LAN2 intrigrant (Systems Engineer) 2 Feb 05 15:11 Should not be a problem.Give your PC a static IP Address for LAN 2 if you want to use that, like 192.168.43.111, subnet 255.255.255.0.If you have a static IP Addres 192.168.42.111 and subnet 255.255.0.0 then it should work if you select in the Manager under Preferences the IP address 192.168.43.1. RE: IP412 LAN2 IPOMonkey (Programmer) (OP) 3 Feb 05 11:12 That works fine using those address but if i use:LAN1 10.1.1.125 / 255.255.255.0LAN2 10.1.1.126 / 255.255.255.0I cannot connect using LAN2 if this because LAN2 needs to be on aanother subnet ie 10.1.2.126My IP skills are been tested! RE: IP412 LAN2 cobragb (IS/IT--Management) 3 Feb 05 11:22 You are correct. You cannot have both LAN1 and LAN2 on the same subnet. What would be the point of that?