IP412 LAN2

[IPOMonkey]

What am i doing wrong!
I cannot connect using manager when i am plugged directly into LAN2 but everything is fine when plugged into LAN1. The system is using the default IP Address?

Do i need to do anything for LAN1 to communicate with LAN2?

 

[intrigrant]

Should not be a problem.
Give your PC a static IP Address for LAN 2 if you want to use that, like 192.168.43.111, subnet 255.255.255.0.
If you have a static IP Addres 192.168.42.111 and subnet 255.255.0.0 then it should work if you select in the Manager under Preferences the IP address 192.168.43.1.

 

[IPOMonkey]

That works fine using those address but if i use:

LAN1 10.1.1.125 / 255.255.255.0
LAN2 10.1.1.126 / 255.255.255.0

I cannot connect using LAN2 if this because LAN2 needs to be on aanother subnet ie 10.1.2.126

My IP skills are been tested!

 

[cobragb]

You are correct. You cannot have both LAN1 and LAN2 on the same subnet. What would be the point of that?