RAS and Active Directory RAS and Active Directory kflounders (Programmer) (OP) 25 Oct 04 09:47 Can you have the Modem 2 card in IP Office authenticate users via active directory? RE: RAS and Active Directory IPGuru (Vendor) 25 Oct 04 12:37 I would say almost certainly notRAS on the ip office requires a user set to dailin for authentication. RE: RAS and Active Directory kflounders (Programmer) (OP) 25 Oct 04 14:03 I was thinking about maybe using a bastardized work around to give all remote users the same RAS dial in user name and password then get them to log into AD. Its either that or input alot of names and passwords. RE: RAS and Active Directory VOiDDude (Vendor) 25 Oct 04 14:10 Or you could buy 2 better modems for much less then the price of the IPO 2 modem card... RE: RAS and Active Directory Morrack (Vendor) 25 Oct 04 15:41 Heresy! How dare you get practical on us in the face of greater profits for Avaya???? RE: RAS and Active Directory IPGuru (Vendor) 26 Oct 04 04:42 Ah but what about the New modem card for V3 - 8 channels I think.then again probably still cheaper to by 8 modems, but the IPO does alow ISDN data connections as well (if you can get BRI support ) RE: RAS and Active Directory Morrack (Vendor) 26 Oct 04 12:20 Oh, SURE, just pour a pound of SALT in the wounds why don't you???? Actually it will be a 12 port modem card - I do wonder what the price will be, should be interesting.Peter RE: RAS and Active Directory sizbut (TechnicalUser) 26 Oct 04 15:08 It's 12 ports when the winds from the right direction - or in plain english - the number of ports depends on in which control unit it is installed (can recall them of the top of my head). And now for the bad news, it not supported in the 403! And it still can't distinguish modem from fax!!! RE: RAS and Active Directory IPGuru (Vendor) 27 Oct 04 04:42 oop, couldnt be bothered to find my release notes & took a guessstill it is a lot more than 2 RE: RAS and Active Directory sizbut (TechnicalUser) 27 Oct 04 05:12 MEA CULPAThe new modem card is supported on the 403, but will only give you 4 modem channels.On the 412 and the new 406 V2 it gives the full 12 modem channels. Its the old 406 V1 that doesn't support it. RE: RAS and Active Directory Morrack (Vendor) 27 Oct 04 09:28 "Its the old 406 V1 that doesn't support it."... except on sunday afternoons, and then it gives 24 modem channels. It doesn't work at all the rest of the week though so forget it.