×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Update failure !!!!

Update failure !!!!

Update failure !!!!

(OP)
I just tried to upgrade my PC to V2.1
Following the instructions from AVAVA I did the Windows Add/Remove feature.
This failed to work.

I went further and deleted all the files manually yet I still can not install V2.1

Any suggestions would be appreciated.

RE: Update failure !!!!

If you have read all the posts concerning V2.1 the best advice would be DONT DO IT
stick with V2.0 untill V2.1 is resolved

RE: Update failure !!!!

Lawdy Lawdy Lawdy how our roles have reversed!  

What prompted you to become the new prophet of doom IPGuru?  *grin*

Peter

RE: Update failure !!!!

it may have something to do with the 10 sites that I have that are desperate for working firmware :-(

RE: Update failure !!!!

What are the known issues with 2.1.24?  Softphone when using DT sets, PM 2.1.8 still has preferences bug, what else?

From my testing the phantom callers in queue bug is finally gone, and that's a big hallelujah from me!

Peter

RE: Update failure !!!!

Morrack , 2.1 (24) is broken
2.1 (15) is broken
3.0 is broken

2.0(18) acceptable
1.4 (37) good

2.2 and 2.3 Network Alchemy was great until , Lucent bought and Avaya has blessed it with the spaghetti software.

We are using 2.1 (248901) , there are still problems with queing, rebooting when paging ip phones , softconsoles crashing, VCM channels locking up , incoming call routes destination blanking out.

It think spahetti software is a pretty good description.

Network Alchemy was fantastic ,these lot cannot even get a tech bulletin right.

Tra

RE: Update failure !!!!

3.0 is not broken, it is Beta sofware & expected to have bugs, if not there would be no point in Beta testing

I just hope that Avaya are learning frrom the 2.1 fiasco & we do not guet another premature release

RE: Update failure !!!!

For 2.1.24 specifically though, from what I can tell if you are using DS phones (not DT) it works fine.  I have not had any of the problems reported with it (including PM preferences logging you out of huntgroups, just tried that).

Mind you I have only rolled it out to 2 sites plus my office and lab systems, being very very cautios with it :)

Peter

RE: Update failure !!!!

Thats fine, your problems will start if you use Vmpro 2.1.10

just broke Version 3 all i did was access voicemail and it
re-booted, beta or not still broken.

Tra

RE: Update failure !!!!

The only problem I've found with 2.1.10 (IPO 2.1.24 w/ DS phones) is the touch tone digit dialed to end recordings getting captured in the recording and causing problems when played back.  Are you running into other issues - and do you have DT phones?

Peter

RE: Update failure !!!!

OK yes , technicaly 3.0 is broke in plases, but then again it is not supposed to be fully working

I dont thisnk the time is right for 3.0 to be being discussed in theis forum, with the posible execption of imparting good news as to what is comming.

My 3.0 test beds are relativly stable, but I havent had time to realy try to break them yet

RE: Update failure !!!!

Most of our customers are running 2.1(24) and VM pro 2.1(10) and DT phones and IP phones and PM Pro and SoftConsole and.... no problems as you mention.
The only thing i am investigating is a stopping License Key server if the IPO is not used for at least 24 hours ( weekend ).
Maybe the problems are locale related?

RE: Update failure !!!!

Ya know, that makes a heck of a lot more sense than being related to DT phones vs DS phones.  What locale are running under intrigant?  Perhaps some of our esteemed gurus from that dreary little island off the coast of france would care to try running their testbed systems under your locale to see if they have 2.1.24 issues, even with their DT phones.  Would be interesting to know.

Peter

RE: Update failure !!!!

Will you guys stop slagging off Eire, it may be a small rainy island of the of France but that's no reason to pick on it.

RE: Update failure !!!!

hehehehe

I was actually referring to england...

RE: Update failure !!!!

...and what's wrong with Wales, have the Scots upset you, we're all one happy island, honest.

RE: Update failure !!!!

Merthyr tidfyll rules

Soopa Doopa Intergalactic IP Office installation mechanic and configuration corruptor from way back.

RE: Update failure !!!!

I am not even going to think about responding to this one peter, oops I just did

RE: Update failure !!!!

Come on, Grommet, there's no need to fret!  Why don't we invent an automatic IP Office installation machine that's capable of forseeing all firmware bugs and therefore avoiding them.  That should cheer you up, what do you say??

*grin*

Wallace

RE: Update failure !!!!

Our systems use the nld locale, thats that tiny undersealevel country at the coast of the northsea.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close