Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

isdn modem/data circuits setting problems

isdn modem/data circuits setting problems

isdn modem/data circuits setting problems

hi! I have 3070 sopho system,DLX-L board, PNT-L network terminator and some ISDN modems (USB and PCI modems,ETSI-ISDN),RVS software (ISDN applications, telephony/ fax/ videotelephony/ file transfers etc).I try to follow step by step data facilities but desn't work,the ISDN loop test failed.I want to use all applications of RVS and both B channel( I don't understand how assign to one circuit  2 MSN/BSP-ID?)What are the correct settings for this purpose (fcm/ibsc/bspt/cv..etc)?Excuse me for my poor english.

RE: isdn modem/data circuits setting problems

I work with Is3030 pk 810 but it's similar, my dnr is configurated in this mode IBSC 0= 64 Kbit/s unresticted, BSPT =98. i work with RVS and it's perfect...
Try bye

RE: isdn modem/data circuits setting problems

I haven't done this for a long time but I just remembered something <g>. Just test your options in your own environment and see what it will do for you together with your application. I use the OM commands because I don't remember or have no clue where to find them in SysManager ......
Good luck !!

1. With CHDNRC you can add more numbers to a circuit and gives you the option to put it above or under the existing DNR. Note: FCM's and features of the 1st DNR can be used !!

2. 22031979 is right to change the BSPT/IBSC value.


(Check the format, it has been 3 years !!)

3. Check your S0 bus Hwa's;
Your ergoline's or other digital phones use fixed MSN with one digit. You can change the MSN type to 1 with the amount of digits you use in your internal number scheme.

Note: Was always nice when people want to reuse the Hwa's again for regular phone's, yup >> everybody forgot to put these settings back.



(Check the format again !!)

Maybe unnecessary but check if they are installed :

DISERV:4061,1,30&31; again

4. If I am correct the Fixed digits in your exchange will not have any effect anymore. Usully on the S0 bus they were 2&3 in your pbx and for the phones 2&3 (D622) or 0&1 (Ergoline). I used to leave them alone.


5. Last thing is that you can add channel bundling to your DNR's if necessay with ASFACM. I believe it was 56. Just check ASFACM:? for the complete list.

I hope this might help you.

Time 4 some coffee ... Douwe Egberts of zo.
(Toch maar een Heineken)

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close