Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Turn "do not disturb" on/off externally to Phone Manager

Status
Not open for further replies.
snelders8

snelders8

Programmer
Joined
Jun 2, 2004
Messages
12
Location
AU
Hi,

Is there a way af being able to turn Do Not Distrun on and off in Phone Manager externally to the program - ie. I want to write a program that can do it for me under certain conditions.

I have tried via the TAPI but I'm having trouble learning how to program it and make it work.
Is there a registry setting that can be changed? Where is the Do Not Disturb setting in Phone Manager configuration stored?

Any help is much appreciated.

Thanks,
Jason Snelders
 
Sort by date Sort by votes
The setting is part of the system configuration, its not stored by Phone Manger but read and written to the switch.
 
Upvote 0 Downvote
If you want REALLY simple, and are prepared to have your user on an analog phone in order to get it - route the analog port through a modem on the PC first. Then have your program take the modem offhook and dial *08 or *09 as needed to turn DND on or off.

Or, better but more complex, setup a VMPro callflow that can be accessed via a shortcode, that points to a Play Configuration Menu token. You'll have to trial and error the exact timing and sequence of digits but you should be able to design your program to use a modem on an analog port to dial through this callflow and turn any users DND on or off - digital station or not.

Peter
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
IP Office R12 - Remotely enable Do-Not-Disturb for other EXT
Replies
9
Views
1K
dave_jey2004
D
eaglepromopro
  • Locked
  • Question Question
Do Not Disturb
Replies
1
Views
322
sizbut
sizbut
William C290
  • Question Question
Media Manager – New Agents' Recordings Not Showing in User Portal (Others enabled)
Replies
1
Views
176
William C290
William C290
WirSysPlus
  • Locked
  • Question Question
Media Manager
Replies
0
Views
276
WirSysPlus
WirSysPlus
dsm600rr
  • Locked
  • Question Question
IX Workplace - "Your messages may not be up to date"
Replies
4
Views
753
sizbut
sizbut

Part and Inventory Search

Sponsor

Back
Top