Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
td500 password
- Thread starter bmihaly
- Start date
Phoneguy65
Vendor
There is a procedure in the manual clearly describing a forced connection to the switch. Please refer to the section describing the CPU card and the rotary switch settings.
NOTE: System switch is ALWAYS set to ZERO, no exceptions.
NOTE: Mode switch can reset all parameters to factory defaults, don't randomly play with it - you'll likely blow away the whole database.
Be careful.
Pat MacKinnon
Omni telecommunications Inc.,
London, Ontario, Canada
omnitel-ca
NOTE: System switch is ALWAYS set to ZERO, no exceptions.
NOTE: Mode switch can reset all parameters to factory defaults, don't randomly play with it - you'll likely blow away the whole database.
Be careful.
Pat MacKinnon
Omni telecommunications Inc.,
London, Ontario, Canada
omnitel-ca
- Status