Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ns500 master password

ashrafsalahabbas

Systems Engineer
Nov 29, 2024
2
I have ns-500 Panasonic Pbx and i forgetting installer password after change is there is master password to open with out reset default ns-500
Please help me
 
Do you know the procedure of Master password applying?
 
I have ns-500 Panasonic Pbx and i forgetting installer password after change is there is master password to open with out reset default ns-500
Please help me
Do you have a recent backup?
Or do you have another access that allows you to make a backup?
Otherwise it is very complex, you have to send a request to Panasonic, with the serial number, proof of purchase, etc., the "Master" password changes every month.
If you have a recent backup I have a solution!
To open the PDF Sales_Company_login the password is: 2ufrompanasonic

With a recent backup and the solution open the file with sales_company, if you think a little there is a way to get out of the problem: total reset of NS then injection of the backup with the changed Installer password.
 

Attachments

  • Password_reset_request.pdf.pdf
    35.5 KB · Views: 20
  • Sales_Company_Login.pdf
    1.4 MB · Views: 25
Last edited:
Do you know the procedure of Master password applying?
To open the PDF Sales_Company_login the password is: 2ufrompanasonic
 

Attachments

  • Sales_Company_Login.pdf
    1.4 MB · Views: 10
Do you have a recent backup?
Or do you have another access that allows you to make a backup?
Otherwise it is very complex, you have to send a request to Panasonic, with the serial number, proof of purchase, etc., the "Master" password changes every month.
If you have a recent backup I have a solution!
To open the PDF Sales_Company_login the password is: 2ufrompanasonic

With a recent backup and the solution open the file with sales_company, if you think a little there is a way to get out of the problem: total reset of NS then injection of the backup with the changed Installer password.
i dont have backup what can ido
 
The Master password is 6594898804
But... I'll ask you again: Do you know the procedure of Master password applying?
 
The Master password is 6594898804
But... I'll ask you again: Do you know the procedure of Master password applying?
Hello



Sorry but there is no documentation



Please set switch to Initialise but do not reset.

Log into PBX using browser:

INSTALLER

MASTER_PASSWORD



Once logged in, go to PBX Configuration - Maintenance - Main - Password And change password

Set switch back to Normal asap. In case of Power failure the system would be reset.

(If you have chosen a login other than INSTALLER, you must put it in place of INSTALLER, I never put INSTALLER as a login)
 
Last edited:

Part and Inventory Search

Sponsor

Back
Top