×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

ISDN ETSI from LUCENT Definity

ISDN ETSI from LUCENT Definity

ISDN ETSI from LUCENT Definity

(OP)
Folks,

I have a solution with a Switch from Marconi with a link E-1 ISDN ETSI, it is connected to the Definity. The equipment are not in communication, because the Definity send any bits, such as 030200000F0101C01803A98386 instead of 08..., 08.. is the standard of ETSI. Does anybody know what mean 03... is ?

Thanks in advance

Juliano F.

RE: ISDN ETSI from LUCENT Definity


Hi there - I've pasted the working Definity config of a simple ESTI E1 circuit as used here in the UK - Hope it helps.  Apologies for the formatting - I suggest you paste into an app. to make sense of it.

Regards,

G.




change ds1 01a16                                                Page   1 of   1
                                DS1 CIRCUIT PACK

            Location: 01A16                           Name: BT ISDN30E
            Bit Rate: 2.048                    Line Coding: hdb3

      Signaling Mode: isdn-pri
             Connect: network
                                          Country Protocol: etsi
                                          Protocol Version: b
Interface Companding: alaw                             CRC? n
           Idle Code: 01010100
                              DCP/Analog Bearer Capability: 3.1kHz




      Slip Detection? n                 Near-end CSU Type: other



change trunk-group 1                                            Page   1 of  10
                                TRUNK GROUP

Group Number: 1                    Group Type: isdn          CDR Reports: y
  Group Name: BT 7000 DDI 01A16           COR: 50       TN: 1        TAC: 031
   Direction: two-way        Outgoing Display? n
 Dial Access? y                Busy Threshold: 99          Night Service:
Queue Length: 0
Service Type: public-ntwrk          Auth Code? n            TestCall ITC: rest
                         Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
         Codeset to Send Display: 6     Codeset to Send TCM,Lookahead: 6
        Max Message Size to Send: 260   Charge Advice: none
  Supplementary Service Protocol: c     Digit Handling (in/out): enbloc/enbloc

            Trunk Hunt: cyclical
     Connected to Toll? n      STT Loss: normal       DTT to DCO Loss: normal
Calling Number - Delete:     Insert:                 Numbering Format:
              Bit Rate: 1200         Synchronization: async    Duplex: full
 Disconnect Supervision - In? y  Out? n
 Answer Supervision Timeout: 0

change trunk-group 1                                            Page   2 of  10
TRUNK FEATURES
          ACA Assignment? n            Measured: both      Wideband Support? n
                                                          Maintenance Tests? y
                               Data Restriction? n     NCA-TSC Trunk Member: 1
                                      Send Name: n      Send Calling Number: n
            Used for DCS? n                           Send Connected Number: n
   Suppress # Outpulsing? n
 Outgoing Channel ID Encoding: preferred     UUI IE Treatment: service-provider






               Send UCID? n
 Send Codeset 6/7 LAI IE? y







change trunk-group 1                                            Page   4 of  10
                                 TRUNK GROUP
                                      Administered Members (min/max):   1/30
GROUP MEMBER ASSIGNMENTS                  Total Administered Members:  30

       Port    Code Sfx Name        Night           Sig Grp
   1: g1A1601 TN464  F                                8
   2: 01A1602 TN464  F                                8
   3: 01A1603 TN464  F                                8
   4: 01A1604 TN464  F                                8
   5: 01A1605 TN464  F                                8
   6: 01A1606 TN464  F                                8
   7: 01A1607 TN464  F                                8
   8: 01A1608 TN464  F                                8
   9: 01A1609 TN464  F                                8
  10: 01A1610 TN464  F                                8
  11: 01A1611 TN464  F                                8
  12: 01A1612 TN464  F                                8
  13: 01A1613 TN464  F                                8
  14: 01A1614 TN464  F                                8
  15: 01A1615 TN464  F                                8


change trunk-group 1                                            Page   5 of  10
                                 TRUNK GROUP
                                      Administered Members (min/max):   1/30
GROUP MEMBER ASSIGNMENTS                  Total Administered Members:  30

       Port    Code Sfx Name        Night           Sig Grp
  16: 01A1617 TN464  F                                8
  17: 01A1618 TN464  F                                8
  18: 01A1619 TN464  F                                8
  19: 01A1620 TN464  F                                8
  20: 01A1621 TN464  F                                8
  21: 01A1622 TN464  F                                8
  22: 01A1623 TN464  F                                8
  23: 01A1624 TN464  F                                8
  24: 01A1625 TN464  F                                8
  25: 01A1626 TN464  F                                8
  26: 01A1627 TN464  F                                8
  27: 01A1628 TN464  F                                8
  28: 01A1629 TN464  F                                8
  29: 01A1630 TN464  F                                8
  30: 01A1631 TN464  F                                8









RE: ISDN ETSI from LUCENT Definity

(OP)
fastbusy,

Thank you very much for your help.
Could you help me again ?
In the display on the POTS digital, they are receiving the following format : Call from 9202, for example. (9202 is extension line)
When the PBXs are connected back-to-back, the POTS receive JULIANO 9202, how can I change in the PBX to the POTS receive the name and number correctly?
It happens because I have a voice compression system in the middle, and the people from voice compression system told me the PBX is using a proprietary signalling and does not standard ISDN, so the voice compression system can not understand the bits from PBX.

Thank you,

Juliano

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close