×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

System Resetting

System Resetting

System Resetting

(OP)
Our 412 system keeps resetting, spotted this in the monitor just before it fails, any ideas on what it means or how to fix.

998150mS PRN: .FATAL TLB Data Load Error address=f8f40464 d=5 pc=008d3da0 01e686f0 008d4c98 008d1ef0 008f0f4c 008e8168 IP 412 1.4(25)

Many thanks

Steve

RE: System Resetting

Hello

It maybe due to high network traffic, I come accross this once this message becasuse their was too much traffic been requested to the IPoffice i.e having two + copys off the monitor running - port scan.

RE: System Resetting

(OP)
Also, when the system resets, we see this:

1mS PRN: Monitor Started IP=192.168.10.98 IP 412 1.4(25) htbchurch
1mS PRN: LAW=A PRI=1, BRI=0, ALOG=0, ADSL=0 VCOMP=20, MDM=0, WAN=1, MODU=5 LANM=0 CkSRC=5 VMAIL=0(VER=0 TYP=1) CALLS=0(TOT=0)
80mS ERR: IP412 TDMLink 2 reports error at other end
152mS PRN: TFTPServer::RRQ(from 192.168.10.99) nasystem/licence_list
153mS PRN: TAPI Authentication: length check - dplen=12, dp-buf_start=12
154mS PRN: TAPI Authentication: Progress as connect = 1
166mS ERR: Device Up 3


Is TDMLink 2 one of our DT boxes?
Should i try reinstalling the firmware or dropping back to 1.4(22)?

Thanks

RE: System Resetting

Hi,

I have a IPoffice 406 with the new software 1.4.25 and
the system restart every time that a call is transfered
from one IPphone (model 4606) to another IPphone.
To fix the problem I made the upgrade of the IPphone
software , the one that come with the IPO Manager software.

I'm not idea if it can be your problem but I hope that
it can help you

Bye,
Gustavo

RE: System Resetting

(OP)
May have a new lead on this

Went to modify the stillqueuing message on our main reception number, the system crashed consistently!

Our voicemailpro server is still on 1.3 whilst our ipoffices are on 1.4, could this cause an issue. Is there a documented upgrade process for VoicemailPro 1.4?

Or is it more likely to be an individual mailbox/wav issue?

note, we weren't editing this message on previous crashes, but it may be possible it was being accessed.

Thanks

Steve

RE: System Resetting

My strong suggestion would be to

Upgrade 412 and all mods to 1.4(25)
Make sure the version of VM is correct being 1.4.3

In my experence I have seen many sites reboot, and do strange things because of the version or incorrect version of VM being run .

When you have done this you are dealing with a level paying field, and I would perform your tracing again and post the results it it continues to reboot.
The options that should be ticked in manager are
• Call/Packets/Line Send
• Call/Packets/Line Receive
• Call/Packets/Extension Send
• Call/Packets/Extension Receive
• Call/Packets/Extension RxP
• Call/Packets/Extension TxP
• Call/Events/Call Delta
• Call/Events/Map
• Call/Events/Targetting
• Call/Events/Call Logging
• System/Error
• System/Print
• System/Resource Status

Also it would be hard to get support from AVAYA as they will ask for the VM to be upgraded and for you to be running 1.4(25)

Certain versions of 1.3 were very unstabale in regard to conferencing on the 412 and would cause rebooting. The upgrade precedure from 1.3 to 1.4 is very stright forward, if you are going to go down this track re-post and i will give you the main steps.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close