Configuring NAT
Configuring NAT
(OP)
Any body got any help,ideas an/or advice on how to configure network address translation on a 1601.
I want to keep our internal IP addressing scheme, which is menmonic in nature, and translate that to a CLASS C Address as provided by our ISP.
I also need to be able to allow all LAN nodes access to external E-Mail but limit WEB, FTP & Telnet access to specific users. How do I relate access lists to NAT?
We were given the 1601's without manuals, and I've never configured a CISCO router before. Any help most appreciated.
I want to keep our internal IP addressing scheme, which is menmonic in nature, and translate that to a CLASS C Address as provided by our ISP.
I also need to be able to allow all LAN nodes access to external E-Mail but limit WEB, FTP & Telnet access to specific users. How do I relate access lists to NAT?
We were given the 1601's without manuals, and I've never configured a CISCO router before. Any help most appreciated.
RE: Configuring NAT
I've not had any dealings with NAT yet but I came across this paper the other day which may help you on your quest.
http://www.cisco.com/warp/public/cc/sol/mkt/ent/ndsgn/nat1_wp.htm
Good luck! :)
Neil