Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BRI trunk

Status
Not open for further replies.
Manolis

Manolis

Programmer
Aug 17, 2001
4
GR
Hi there,
I have a Lucent Definity G3si rel 6.0, and i have to use it with a cisco 3640 in order to implement voip.
3640 is connected to Definity via 2 BRI lines (wich comes from BRI LINE (TN556C) card)
How can i create a trunk in order to use those BRI lines lines under tac ?
thank you in advance for your time and attention


Stamatakis Emmanuel
 
Sort by date Sort by votes
You can add the TN556 as a trunk-bri board. But keep in mind that the card can be used either for bri-stations or bri-trunk.

Hope this helps..

John
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question
Internal Trunk override sac/cf of station
Replies
0
Views
158
milske
M
M
  • Locked
  • Question
Call from internal trunk sac/cf override
Replies
0
Views
140
milske
M
J
  • Locked
  • Question
Trunk Analyzer Delete Data
Replies
1
Views
328
gnesvik
gnesvik
glmyers
  • Locked
  • Question
TRUNK GROUP REPORT
Replies
3
Views
671
glmyers
glmyers
Ru_Grey
  • Locked
  • Question
Ip office 500 trunk h.323 no ring-back tone
Replies
0
Views
233
Ru_Grey
Ru_Grey

Part and Inventory Search

Sponsor

Back
Top